Hoover Gas Hob - Silver - HHG6BF4C3X

The H-Hob 300 Gas Hob in Stainless Steel features powerful hobs, redesigned with a modern aestheti...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Hoover HHG6BF4C3X Gas Hob is designed for home cooks seeking precision and power in their kitchen. Its key benefit is the versatile heat control offered by four gas burners, including a high-output double crown burner, perfect for a variety of cooking tasks. A minor caveat is that this model is not compatible with discount codes. This 60 cm built-in hob features a durable stainless steel finish, cast iron pan supports for stability and heat distribution, and easy-to-use rotary controls.

All features

ColourSilver
Model Part NumberHHG6BF4C3X
BrandHoover

Extended Product Information

FAQs

What is the power output of the double crown burner?

The double crown burner provides up to 4.2 kW of power.

Are the pan supports removable for cleaning?

Yes, the cast iron pan supports are removable. They are also dishwasher safe.

What type of gas does this hob use?

This hob is designed for use with Methane gas.

What are the dimensions for installation?

The required installation compartment dimensions are 56 cm width, 48 cm depth, and a maximum height of 3.5 cm.

Can I use this hob with propane gas?

This model is specified for Methane gas. If you require propane compatibility, please check for a model specifically designed for LPG (Liquefied Petroleum Gas) or consult with a gas professional about conversion kits, though this is not always possible or recommended.

How do I clean the stainless steel surface?

Use a soft, damp cloth with a mild detergent. Avoid abrasive cleaners or scouring pads to prevent scratching the stainless steel.

Does the hob have an electric ignition?

Yes, gas hobs typically incorporate an automatic electronic ignition system, activated when turning the control knobs. A standard electrical connection is usually required for this function.

Troubleshooting

Burner not igniting

Check that the gas supply is turned on. Ensure the burner cap is correctly seated and dry. Clean the igniter spark plug if it appears dirty or wet.

Flame is weak or uneven

Verify the gas control knob is fully turned to the desired setting. Check that the burner holes are not blocked by debris. Ensure the pan support grids are correctly positioned.

Gas smell detected

Immediately turn off the gas supply at the main valve. Do not operate any electrical switches or open flames. Ventilate the area by opening windows and doors. Contact a qualified gas engineer.

Cast iron grid is stained or discolored

Minor discoloration is normal with cast iron. For stubborn stains, try a paste of baking soda and water, let it sit, then gently scrub. Ensure grids are thoroughly dried after cleaning to prevent rust.

Pros and Cons

Pros

  • High-performance double crown burner for rapid cooking.
  • Durable and stable cast iron pan supports.
  • Dishwasher-safe grids for easy cleaning.
  • Modern stainless steel design fits most kitchens.
  • Precise control over heat levels with rotary knobs.

Cons

  • Not compatible with discount codes.
  • Requires a gas connection, not suitable for electric-only kitchens.
  • The low profile (8mm height) might require precise installation to be flush with certain countertops.

Setup, Compatibility & Care

Setup:

This hob is designed for built-in installation into a standard 60 cm countertop cutout. Ensure that your kitchen has a dedicated gas supply and appropriate ventilation. Installation should be performed by a qualified gas engineer to ensure safety and compliance with regulations.

Compatibility:

  • Gas Type: Compatible with Methane gas.
  • Electrical Supply: While it is a gas hob, a standard electrical connection may be required for ignition systems.
  • Countertop Cutout: Requires an installation compartment of 56 cm width, 48 cm depth, and a maximum height of 3.5 cm.

Care and Cleaning:

  • Surface: The stainless steel top surface can be cleaned with a soft, damp cloth and mild detergent. Avoid abrasive cleaners that could scratch the finish.
  • Grids: The cast iron grids are dishwasher safe. For best results, allow them to cool before placing them in the dishwasher. Alternatively, they can be hand-washed with warm, soapy water.
  • Burner Caps and Heads: These can usually be removed and cleaned gently with a damp cloth and mild soap. Ensure all parts are completely dry before reassembling to prevent ignition issues.