Tetrosyl Extra Hardener - TETEXH001
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Tetrosyl Extra Hardener is for DIY car enthusiasts and professional bodywork technicians who need a reliable paste hardener for polyester fillers. Its key benefit is ensuring proper curing for a smooth, durable finish when repairing car body imperfections. A caveat is its specific formulation, requiring use with Tetrosyl Polyester fillers for optimal results. This 40g tube of red paste hardener is designed to accelerate the curing process of polyester body fillers, making it essential for filling holes and smoothing out surfaces on automotive bodywork.
All features
| Model Part Number | TETEXH001 |
|---|---|
| Brand | Tetrosyl |
Extended Product Information
FAQs
What is Tetrosyl Extra Hardener used for?
It is used to initiate and accelerate the curing process of Tetrosyl Polyester fillers, enabling them to harden for application and sanding on car bodywork.
Can I use this hardener with any brand of polyester filler?
No, this hardener is specifically formulated for use with all Tetrosyl Polyester fillers only.
How much hardener should I use?
The exact amount depends on the specific Tetrosyl Polyester filler product. Always refer to the instructions provided on the filler packaging for the correct mixing ratio.
What is the shelf life of the hardener?
When stored correctly in a cool, dry place with the cap tightly sealed, the hardener should remain effective for its intended purpose. Refer to product packaging for any specific expiry information.
Is the red color of the hardener significant?
The red color serves as a visual indicator that the hardener has been thoroughly mixed with the filler. A uniform pink or red color indicates proper mixing.
What safety precautions should I take?
Wear gloves and eye protection during use. Ensure good ventilation in the work area. Avoid skin and eye contact.
Troubleshooting
Filler is not hardening or remains soft
Ensure the correct ratio of hardener to filler was used. Verify that the hardener has not expired and was stored correctly. Make sure the hardener was thoroughly mixed into the filler.
Filler is hardening too quickly and is difficult to work with
Check if too much hardener was added. Ensure the ambient temperature is not excessively high, as this can accelerate curing. Work in smaller batches if necessary.
Uneven hardening or cure
Thorough mixing is crucial. Ensure the hardener was completely incorporated into the filler, with no streaks or unmixed portions visible.
Pros and Cons
Pros
- Ensures proper curing of Tetrosyl polyester fillers.
- Easy to mix and apply due to its paste form.
- Contributes to a smooth and sandable finish.
- Convenient 40g tube size for various repair needs.
Cons
- Must be used exclusively with Tetrosyl Polyester fillers.
- Small size may be insufficient for very large repairs.
- Requires careful mixing to avoid under or over-hardening.
Setup, Compatibility & Care
Setup:
- Ensure the Tetrosyl Polyester filler is at the recommended temperature for application.
- Dispense the required amount of filler onto a clean, non-porous mixing surface.
- Add the specified amount of Tetrosyl Extra Hardener (refer to filler instructions for exact ratios).
- Mix thoroughly until a uniform color is achieved, ensuring no streaks of hardener or base filler remain.
Compatibility:
- This hardener is specifically designed for use with *all Tetrosyl Polyester fillers*.
- It is *not recommended* for use with other types of fillers or hardeners.
Care:
- Store the tube in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure the cap is securely fastened after each use to prevent the hardener from drying out or reacting with air moisture.
- Keep out of reach of children and wear appropriate personal protective equipment (gloves, eye protection) during use.