UniBond No More Nails Removable Pads 19mm x 40mm 2 Pack (20 Strips) - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
UniBond No More Nails Removable Pads are ideal for renters or anyone needing a temporary, damage-free way to hang lightweight items. They offer a secure hold on smooth indoor surfaces without the need for nails or screws, but their removability means they are not suitable for heavy items. This guide covers their features, uses, and care.
All features
| Colour | White |
|---|---|
| Brand | UniBond |
Extended Product Information
FAQs
What is the weight limit for these pads?
These pads are designed for lightweight decorative and household items. Specific weight limits are not provided, but they are not intended for heavy objects.
Can I use these pads on wallpaper?
No, these pads are not recommended for use on wallpaper as they can damage the paper and leave residue.
How long will the adhesive last?
The adhesive is designed for temporary fixing. Its longevity depends on the weight of the item, surface condition, and environmental factors. They are easily removable and can be replaced as needed.
Can these pads be reused after removal?
No, once removed, the adhesive on the pads loses its effectiveness and they cannot be reused.
Are these pads suitable for outdoor use?
No, these pads are specifically designed for smooth indoor surfaces only and are not weatherproof.
What surfaces should I avoid using these pads on?
Avoid using these pads on wallpaper, fabric, textured surfaces, brick, concrete, or freshly painted walls. Always test on an inconspicuous area first if unsure.
How do I ensure the best adhesion?
Ensure the surface is perfectly clean, dry, and free from any dust, grease, or moisture before applying the pads with firm pressure for at least 30 seconds.
Troubleshooting
Pads not sticking securely
Ensure the surface is thoroughly cleaned, dry, and free of dust, grease, or silicone. Reapply pressure for a full 30 seconds. Ensure the item is lightweight and suitable for the pad's capacity.
Residue left after removal
Gently rub the residue with a damp cloth or a bit of sticky tape. For stubborn residue, a mild adhesive remover designed for household surfaces can be used, but test in an inconspicuous area first.
Pads won't remove cleanly
Slowly and carefully peel the item away. If it's sticking too firmly, try to gently ease it off or use a thin plastic tool to help separate the pad from the surface while pulling.
Item falls down shortly after application
The item may be too heavy for the pads. Ensure the surface is suitable and the pads were applied correctly with adequate pressure. Check that the surface has not been exposed to moisture.
Pros and Cons
Pros
- Enables damage-free mounting and removal.
- No tools or drilling required for installation.
- Leaves no residue or marks on surfaces.
- Provides a neat finish without visible nails or screws.
- Convenient for temporary displays and decorations.
Cons
- Only suitable for lightweight items.
- Adhesive strength may vary on textured surfaces.
- Not recommended for long-term heavy load bearing.
- Requires smooth, clean surfaces for optimal performance.
- Removable nature means items could potentially detach if disturbed.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from dust or grease. For best results, wipe the surface with a clean cloth and allow it to dry completely.
- Peel one side of the double-sided pad and apply it firmly to the item you wish to mount.
- Peel the other side of the pad.
- Press the item firmly against the desired location on the wall or surface for at least 30 seconds.
Compatibility:
These pads are designed for use on smooth, non-porous indoor surfaces such as:
- Painted Walls (ensure paint is well-adhered)
- Tiles
- Glass
- Metal
- Sealed Wood
Avoid use on wallpaper, fabric, textured surfaces, or freshly painted walls. Test on an inconspicuous area first if unsure.
Care:
- To remove, gently peel the item away from the surface. If residue remains, it can usually be removed with a damp cloth or by gently rubbing.
- Store unused pads in their original packaging in a cool, dry place.