Kenable Power Cable - Right Angle IEC C13 - 3m
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Kenable right-angled power cable is designed for users needing to connect devices with an IEC C13 socket to a UK mains power outlet, particularly in space-constrained environments. Its key benefit is the space-saving right-angled IEC connector, allowing equipment to be placed closer to walls. A minor consideration is the 5A fuse, which is suitable for most common electronics but may not be sufficient for high-power appliances.
All features
| Model Part Number | 012092 |
|---|---|
| Brand | kenable |
Extended Product Information
FAQs
What is an IEC C13 connector?
An IEC C13 connector is a standard type of power socket commonly found on computer monitors, PC power supplies, and other electronic equipment. It is a three-pin female connector.
What is the purpose of the right-angled connector?
The right-angled (90-degree) IEC C13 connector is designed to save space, allowing equipment to be placed closer to walls or in tight enclosures where a straight connector would not fit.
What does 'fused at 5A' mean?
The UK plug contains a 5 Amp fuse. This acts as a safety device to protect your equipment and prevent hazards by blowing and disconnecting power if the current exceeds 5 Amps.
Can I use this cable for a high-power appliance like a heater?
This cable is fused at 5A and rated for 13 Amps total. It is suitable for most standard electronics like monitors and PCs, but may not be sufficient for high-power appliances that draw more than 5A.
What is the cable rating (3G1.0mm² H05VV)?
This indicates the cable construction. '3G' means it has three conductors (Live, Neutral, Earth). '1.0mm²' is the cross-sectional area of each conductor, signifying robustness. 'H05VV' is a type of flexible PVC insulated and sheathed cable suitable for medium mechanical stress.
How long is the cable?
The cable length is 3 meters.
Troubleshooting
Device not powering on
Check that both ends of the cable are securely plugged in. Verify the wall socket is working by testing with another device. Ensure the 5A fuse in the UK plug is intact and correctly seated.
Cable feels loose at the device end
Gently push the IEC C13 connector further into the device port until it is fully seated. Inspect the connector for any debris or damage.
Intermittent power or flickering screen
Inspect the cable for any kinks, cuts, or damage. Try a different wall socket. If the issue persists, the cable may need replacement.
Pros and Cons
Pros
- Space-saving right-angled design
- Durable moulded connectors
- Suitable length for most home/office setups
- Integrated safety fuse
Cons
- 5A fuse may be limiting for high-power devices
- Not suitable for outdoor use
- Standard grey color may not match all aesthetics
Setup, Compatibility & Care
Setup:
- Ensure the device requiring power has a standard IEC C13 inlet port.
- Plug the IEC C13 connector into the device.
- Plug the fused 13A UK plug into a suitable mains wall socket.
Compatibility:
This cable is compatible with any device featuring a C13 power inlet and designed to be powered by a standard UK 3-pin mains socket. Common devices include:
- Monitors
- PC Tower Power Supplies (PSUs)
- Some Printers
- Projectors
- Laptops (via their power brick)
Care:
- Keep the cable away from excessive heat, moisture, and sharp objects.
- Periodically check the cable and connectors for any signs of damage. Do not use if damaged.
- Clean the connectors with a dry cloth only. Do not use liquids.
- Ensure the fuse is appropriate for the connected device. Replacement fuses should be of the same rating (5A).