Lampa Jump Cables - 1.5 Meters
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for motorcycle and scooter owners who need a reliable way to jump-start their batteries. The Lampa Jump Cables provide a safe and effective method for transferring power, ensuring you're back on the road quickly. Keep in mind that these cables are designed for motorcycles and scooters and may not be suitable for larger vehicles.
All features
| Model Part Number | 90361 |
|---|---|
| Brand | Lampa |
Extended Product Information
FAQs
What is the maximum current these cables can handle?
The Lampa Jump Cables have a maximum current rating of 80A.
Are these cables suitable for cars?
No, these cables are specifically designed for motorcycles and scooters and are not suitable for larger vehicles like cars or trucks.
What is the cable length?
The cable length is 1.5 meters.
What is the cable section?
The cable section is 4 mm².
What do the different colors on the clamps represent?
The red clamps are for the positive (+) terminals, and the black clamps are for the negative (-) terminals.
How should I store the jump cables?
Store the jump cables in a dry place to prevent corrosion.
What if the clamps don't fit my battery terminals?
The clamps are designed to fit most motorcycle and scooter battery terminals. Make sure the terminals are clean and free of corrosion. Try repositioning the clamps for a better grip.
Troubleshooting
Motorcycle/Scooter won't start after connecting the cables.
Double-check all connections to ensure they are secure and properly connected (+ to +, - to -). Ensure the working vehicle's engine is running, and allow a few minutes for charging before attempting to start your motorcycle/scooter.
Cables get hot during use.
This may indicate a poor connection or excessive current draw. Check the connections for corrosion or looseness. Reduce the load on your motorcycle/scooter by turning off unnecessary electrical components (lights, etc.) before attempting to start.
Clamps don't fit securely on the battery terminals.
Ensure the clamps are clean and free of corrosion. Try repositioning the clamps for a better grip on the terminals.
Pros and Cons
Pros
- Compact design ideal for motorcycle and scooter battery sizes.
- User-friendly with color-coded clamps for easy and safe connection.
- Durable construction ensures longevity.
- Provides a reliable solution for jump-starting in emergencies.
- Steel spring clamps offer a strong grip for a secure connection.
Cons
- Limited to use with motorcycles and scooters; not suitable for cars or trucks.
- 80A maximum current may not be sufficient for all motorcycle or scooter models.
- Cable length of 1.5 meters might be limiting in some situations.
- Requires access to another battery for jump-starting.
Setup, Compatibility & Care
Setup
- Ensure both the disabled motorcycle/scooter and the working vehicle are turned OFF.
- Connect the red (+) clamp to the positive terminal of the dead battery.
- Connect the other red (+) clamp to the positive terminal of the working battery.
- Connect the black (-) clamp to the negative terminal of the working battery.
- Connect the final black (-) clamp to a suitable grounded metal part on the disabled motorcycle or scooter (away from the battery).
- Start the working vehicle's engine and let it run for a few minutes.
- Try starting your motorcycle or scooter.
- Once started, disconnect the cables in reverse order (black from the grounded metal, black from the working battery, red from the working battery, and red from the dead battery).
Compatibility
- These cables are designed for use with 12V motorcycle and scooter batteries.
- Verify the battery voltage before use.
Care
- Store the cables in a dry place to prevent corrosion.
- Inspect the cables regularly for any damage to the insulation or clamps.
- Clean the clamps if they become corroded to ensure a good connection.