SolaX Triple Power High Voltage Battery - 5.8Kwh
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SolaX Triple Power 5.8Kwh battery is an ideal energy storage solution for homeowners looking to maximize self-consumption of solar power while maintaining a small environmental footprint. It provides a robust 90% depth of discharge and a long-lasting cycle life, making it a reliable backbone for modern renewable energy systems. Users should note that this V3.0 unit is strictly incompatible with older V2.0 system hardware, necessitating careful planning during the design phase of your solar installation.
All features
| Model Part Number | 628025 |
|---|---|
| Brand | SolaX |
Extended Product Information
FAQs
Can I add this battery to an existing SolaX V2.0 system?
No, the V3.0 battery is not compatible with V2.0 system components.
How many batteries can I connect in a three-phase system?
You can connect one master battery and up to three additional batteries for a total of four units.
Is this battery suitable for outdoor installation?
Yes, it features an IP65 protection rating, which means it is protected against dust and water jets.
What is the depth of discharge for this battery?
This model supports a high depth of discharge (DOD) of up to 90%.
What is the expected lifespan of the battery?
The battery is designed for a cycle life exceeding 6000 cycles.
Are the mounting brackets included?
The unit supports both floor and wall mounting; check the specific installation kit contents provided with your unit for bracket details.
Troubleshooting
Battery not recognized by inverter
Check all communication cable connections between the battery and the inverter and ensure they are fully seated.
System indicates a communication error
Verify that you are not mixing V2.0 and V3.0 hardware, as this will cause an immediate system conflict.
Battery stops charging unexpectedly
Check the inverter settings to ensure the charge limit has not been reached and that the system is not in a 'Discharge Only' mode.
Pros and Cons
Pros
- High 90% depth of discharge capability
- Long lifespan exceeding 6000 cycles
- IP65 protection rating allows for indoor or outdoor installation
- Modular design allows for easy capacity expansion
- Sustainable, non-toxic chemical composition
Cons
- Incompatible with previous V2.0 hardware versions
- Requires professional installation for high-voltage systems
- Scalability limits depend on single vs. three-phase system setup
Setup, Compatibility & Care
Installation must be performed by a certified professional due to the high-voltage nature of the equipment.
Compatibility Note: This unit is the Version 3.0 series and cannot be retrofitted into a system running Version 2.0 batteries. Always verify your current inverter's compatibility with the V3.0 communication protocol before purchase.
Maintenance: While the battery is largely maintenance-free, ensure the area remains dry and well-ventilated. Periodically check that the mounting hardware remains secure and that the ventilation paths on the casing are not obstructed by dust or debris.