2kW White Slimline Electric Built-in Kitchen Plinth Space Heater - SIA PLH3
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners seeking an efficient and space-saving heating solution for their kitchen. The SIA PLH3 plinth heater offers effective warmth, especially beneficial for rooms with tiled or wooden flooring, by circulating warm air quickly. However, it requires installation in a plinth or kick-stand, which might require some basic DIY skills. It features three heat settings and built-in overheat protection.
All features
| Model Part Number | PLH3 |
|---|---|
| Brand | SIA |
Extended Product Information
FAQs
What are the dimensions of the heater?
The overall dimensions are 500W x 225D x 100H mm.
What are the plinth cut-out dimensions?
The cut-out dimensions are 460W x 98H mm.
What voltage does the heater use?
The heater uses 220-240V.
What is the power rating?
The nominal power is 1700 - 2000W.
Does the heater come with a power cable?
Yes, a 1.5m power cable is supplied.
What is the warranty period?
The product comes with a 1-year guarantee.
Can I install this myself?
Yes, but you may need basic DIY skills for the plinth cut-out. Ensure the power is off before installation.
What are the heat settings?
The heater has three settings: cold (fan only), warm, and hot.
Troubleshooting
Heater doesn't turn on.
Check the power connection and ensure the outlet is working. Verify the plug and fuse.
Heater is not producing heat.
Check the heat setting. Ensure that the heater is not set to "fan only". If the problem persists, check for any obstructions blocking the air flow.
Overheat protection activated.
Turn off the heater and allow it to cool down. Check for any obstructions blocking the air flow.
Pros and Cons
Pros
- Space-saving design maximizes kitchen space.
- Provides efficient heating, especially in rooms with hard flooring.
- Offers three heat settings for versatile use.
- Easy to install in most kitchen plinths.
- Features overheat protection for safety.
- Easy to control with simple settings.
Cons
- Requires installation within a plinth, potentially limiting placement options.
- May require some DIY skills for installation.
- Primarily designed for heating kitchens, not suitable for other rooms without modification.
- A 13A power supply is needed to operate the heater.
- Limited to white color.
Setup, Compatibility & Care
Setup
- Preparation: Ensure the power supply is off before installation.
- Plinth Cut-out: Cut out a section in your plinth or kick-stand to the dimensions specified (460W x 98H mm).
- Placement: Slide the heater into the cut-out. Ensure there is enough space for the power cable (1.5m).
- Connection: Plug the heater into a standard 13A power outlet.
- Testing: Turn on the heater and test the different heat settings.
Compatibility
- Power Supply: Requires a 220-240V, 13A power supply.
- Dimensions: Check that your plinth cut-out meets the required dimensions before purchase.
Care
- Cleaning: Clean the exterior with a damp cloth.
- Maintenance: Regularly check for dust and debris, which can affect performance.
- Safety: Ensure the heater is not covered or obstructed during operation.