Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone looking to repair rust holes and damage on metal surfaces. The U-POL P40 Fibre Glass Body Filler is ideal for filling holes up to 75mm wide, providing a strong, watertight repair that sets quickly and is ready for shaping and painting. However, ensure proper ventilation when using this product.
| Model Part Number | P40/S |
|---|---|
| Brand | U-POL |
The working time is usually a few minutes after mixing, so work quickly.
The filler typically sets within 20 minutes, but follow the manufacturer's specific instructions.
No, this product is designed for metal, wood, and concrete. It is not recommended for use on plastic.
Start with a coarser grit (e.g., 80-grit) for initial shaping and move to finer grits (e.g., 240-grit or higher) for smoothing.
Yes, the hardener is included with the U-POL P40 Body Filler.
Yes, multiple coats can be applied to fill deeper holes, but allow each layer to partially cure before applying the next.
Yes, it is recommended to apply a primer after sanding the filler and before painting to ensure proper adhesion and a smooth finish.
Dispose of any unused product and containers according to local regulations for hazardous waste.
Ensure the correct ratio of filler to hardener is used. Check the expiration date of both components.
Ensure the filler is applied in thin layers, allowing each layer to cure. Excessive thickness can lead to cracking. Ensure proper surface preparation before application.
Use the appropriate grit sandpaper and allow the filler to fully cure before sanding. Avoid sanding too aggressively.
