Citadel Warhammer Colour Base Paint - Wraithbone - 12ml - 21-25
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Citadel Wraithbone is a high-pigment, off-white base paint engineered for hobbyists looking to establish a smooth, opaque foundation on their miniatures with minimal layers. It is an essential tool for painters focusing on Aeldari or Stormcast Eternals models, offering a warm, matte finish that serves as an excellent canvas for subsequent shades and contrast paints; however, users should note that as a light-toned base paint, it requires careful application to avoid chalky textures if applied too thickly.
All features
| Model Part Number | 21-25 |
|---|---|
| Brand | Citadel |
Extended Product Information
FAQs
Is Wraithbone considered a Layer or Base paint?
Wraithbone is classified as a Base paint, meaning it has a higher pigment count designed to provide solid coverage as a first step.
Can I use Wraithbone on metal miniatures?
Yes, it adheres well to metal, plastic, and resin as long as the surface has been properly primed first.
How long should I wait between coats?
Since it dries in about 30 minutes, wait at least 15-20 minutes to ensure the first layer is completely dry before applying the second.
Do I need to varnish my models after using this?
While not strictly required, using a varnish over your finished model will protect the paint job from wear and tear.
Can I thin this paint with isopropyl alcohol?
No, stick to using water or specialized acrylic thinning mediums to avoid damaging the paint's formula.
Is this paint non-toxic?
Yes, Citadel paints are water-based and non-toxic, making them safe for home hobby use.
Troubleshooting
Paint is leaving a textured or chalky finish.
The paint is likely too thick. Thin it with a small amount of water until it reaches the consistency of skim milk.
Poor coverage on the first coat.
Ensure you are using a base coat primer first; apply two thin coats rather than one heavy layer for better results.
Paint has separated in the pot.
This is normal for acrylics. Use a stainless steel mixing ball inside the pot and shake vigorously to re-incorporate the medium and pigment.
Pros and Cons
Pros
- High opacity reduces the number of coats needed to achieve a solid base color.
- Warm undertones prevent the "stark white" look, making it easier to shade naturally.
- Highly compatible with all major Citadel paint types.
- Easy to thin with water for smoother transitions or glazing.
Cons
- Requires proper thinning to avoid brush strokes or textured surfaces.
- 12ml pot size can be small for painting large-scale vehicles.
- Light pigments can sometimes settle, requiring thorough agitation before use.
Setup, Compatibility & Care
To prepare your paint, shake the 12ml pot vigorously for at least 30 seconds to ensure the pigments are well-mixed. When applying, always use a wet palette to maintain the consistency of the acrylic medium. If the paint thickens, add a tiny amount of water or acrylic medium rather than solvent-based thinners. For tool care, rinse brushes immediately in clean water after use to prevent acrylic buildup in the bristles. Store pots in an upright position in a cool, dry area, and ensure the lid is snapped shut securely after every session to prevent the paint from drying out.