PVC Shower Panel - Dark Grey Hexagon Tile Effect - Matte Finish - 2400x1000x10mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Ener-J PVC Shower Panel is designed for homeowners and renovators seeking a quick, stylish, and waterproof upgrade for bathrooms, shower enclosures, and wet rooms. Its primary benefit is the fast, mess-free installation that bypasses the need for grout, offering a seamless, modern look. A potential caveat is ensuring proper sub-surface preparation for optimal adhesion. Key features include its durable PVC construction, a matte dark grey hexagon tile effect, full waterproofing, flameproof and mould-resistant properties, and large dimensions for efficient coverage.
All features
| Model Part Number | 5056865601697 |
|---|---|
| Brand | ENER-J |
Extended Product Information
FAQs
What is the best way to clean the PVC shower panel?
Clean the panel with a soft, damp cloth and a mild, non-abrasive detergent. Rinse with clean water and dry with a soft cloth. Avoid abrasive cleaners.
Can I install this panel over existing tiles?
Yes, provided the existing tiles are securely bonded to the wall, are smooth, and the surface is perfectly flat. Clean the tile surface thoroughly before applying adhesive.
Is this panel suitable for a ceiling application?
While primarily designed for walls, it could be used on a ceiling if properly supported and secured with appropriate fixings and adhesives, assuming the ceiling surface is suitable and flat.
How do I cut holes for plumbing or fixtures?
Use a drill with appropriate hole saws or a jigsaw with a fine-tooth blade. Measure carefully and make slow, controlled cuts. Sand any rough edges smooth.
What type of adhesive should I use?
A strong, waterproof, non-solvent-based adhesive suitable for PVC panels is recommended. Always check the adhesive manufacturer's recommendations for use with PVC and follow their instructions.
How long will this panel last?
When installed correctly and maintained according to care instructions, the durable PVC construction is designed for long-term performance and resistance to moisture and mould.
Can the matte finish be damaged?
The matte finish can be scratched or damaged by abrasive cleaning materials or sharp objects. Always use soft cloths and mild cleaning agents.
Troubleshooting
Panel not adhering properly
Ensure the wall surface is clean, dry, completely flat, and free from dust or grease. Reapply adhesive according to manufacturer instructions, ensuring even coverage.
Gaps between panels
Check if panels are cut precisely and if the wall is perfectly plumb. Adjust cuts or use a suitable trim or sealant to fill any small gaps.
Difficulty cutting the panel
Use a fine-tooth blade on a jigsaw or circular saw. Ensure the panel is securely supported during cutting and wear safety goggles.
Water ingress at edges or joints
Ensure all edges and joints are properly sealed with a high-quality waterproof sealant. Reapply sealant if necessary, ensuring a continuous, unbroken line.
Pros and Cons
Pros
- Quick and easy installation, saving time and effort.
- Completely waterproof, preventing leaks and water damage.
- Mould-resistant and grout-free for enhanced hygiene.
- Durable and long-lasting PVC material.
- Modern and attractive matte hexagon tile-effect finish.
- Flameproof for increased safety.
Cons
- Requires a clean, dry, and flat surface for proper adhesion.
- May not be suitable for areas with extreme temperature fluctuations.
- Cutting and shaping requires appropriate tools and care.
- Color and finish may differ slightly from screen representations.
- Potential for scratching if abrasive cleaning tools are used.
Setup, Compatibility & Care
Setup:
- Prepare the Surface: Ensure the wall is clean, dry, flat, and structurally sound. Remove any old tiles, adhesive, or wallpaper.
- Measure and Cut: Carefully measure the required dimensions and cut the panel using a fine-tooth saw or jigsaw. Always wear safety glasses.
- Apply Adhesive: Apply a suitable waterproof adhesive generously to the back of the panel or the wall surface, following adhesive manufacturer instructions.
- Install Panel: Press the panel firmly into place, ensuring it is level and aligned correctly. For multiple panels, ensure a tight fit to create a seamless finish.
- Seal Edges: Use a waterproof sealant (silicone or similar) around the edges, joints, and any cut-outs (like for fixtures) to ensure a watertight seal.
Compatibility:
The panel is designed for interior use in bathrooms, shower areas, and wet rooms. It adheres well to most flat, rigid surfaces including plasterboard, existing tiles (if smooth and well-adhered), and concrete. Ensure compatibility with your chosen adhesive.
Care:
- Clean regularly with a soft, damp cloth and mild detergent.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the matte finish.
- Wipe spills immediately to prevent staining.