Tulip Fabric Spray Paint - Snow



Currently unavailable



Currently unavailable
This guide is for crafters, DIY enthusiasts, and anyone looking to easily add vibrant, permanent color to fabrics. The key benefit is the spray-on application that results in a soft, flexible finish. A minor caveat is that while permanent, proper care ensures longevity. Tulip Fabric Spray Paint offers a quick and simple method for customizing textiles with rich, lasting colors, including a unique glow-in-the-dark option, suitable for various decorative and craft projects.
| Model Part Number | 26569 |
|---|---|
| Brand | Tulip |
The paint typically dries to the touch within 1-2 hours, but full curing and permanence can take longer, depending on application thickness and environmental conditions. It's best to allow at least 24 hours before heavy handling or washing.
Yes, Tulip Fabric Spray Paint can be used on fabric shoes. Ensure the shoe material is suitable and follow all application and care instructions for best results.
While many applications are machine washable without explicit heat setting, for maximum durability, heat setting is recommended. This can often be done by placing the decorated item in a hot dryer for 30 minutes on a high setting. Always check product packaging for specific heat-setting instructions.
The brightness of the glow-in-the-dark feature depends on the amount of paint applied and the 'charge' it receives from light. For best results, apply multiple light coats in a dark area and expose to a strong light source before viewing in complete darkness.
It is generally recommended to apply to a clean, unpainted fabric surface for the best adhesion and vibrancy. Applying over existing paint or dyes may yield unpredictable results.
When stored properly in a cool, dry place away from direct sunlight and extreme temperatures, Tulip Fabric Spray Paint typically maintains its quality for several years. Ensure the nozzle is cleared after each use to prevent drying inside the can.
Shake the can vigorously for a full minute. Ensure the nozzle is not clogged; if it is, remove and rinse carefully with warm water. Spray away from the fabric briefly to clear any blockage.
Ensure the paint was fully dry before washing and that the fabric was properly heat-set if required. Reapply and ensure adequate drying and heat-setting time.
Apply a base coat of white or a lighter shade of the desired color first, allow it to dry, then apply the final color. Multiple light coats are better than one heavy coat.
After each use, turn the can upside down and spray for a few seconds to clear the nozzle. If still clogged, remove the nozzle and clean with warm water and a pin.
Setup: Ensure the fabric is clean, dry, and free of any finishes or sizing. Pre-wash fabrics without fabric softener. Shake the can vigorously for at least one minute before and during use. For best results, test spray on a scrap piece of fabric first. Use in a well-ventilated area and protect surrounding surfaces from overspray.
Compatibility: Suitable for most natural and synthetic fabrics, including cotton, polyester blends, linen, and rayon. Not recommended for use on non-fabric surfaces or extremely delicate materials that cannot withstand light moisture.
Care: Allow the paint to dry completely, typically 1-2 hours, and heat set if recommended by specific project instructions or for maximum durability (e.g., tumble dry on high heat for 30 minutes). Once set, the fabric paint is machine washable in cold water on a gentle cycle. Avoid using bleach or harsh detergents. Lay flat or hang to dry.