Wall!Supply - Linari - Ribbed Round HD Printed 3D Slat Wall Panels - 4 Pcs 2.3m²
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Wall!Supply UltraLight Linari Ribbed Round 3D Slat Wall Panels are an ideal solution for homeowners and interior decorators looking to add a sophisticated marble-effect architectural feature to their living rooms, dining rooms, kitchens, or bedrooms. By combining a lightweight design with an HD-printed 3D texture, these panels offer an accessible way to transform blank interior walls into high-impact statement pieces. While they are exceptionally easy to install and visually striking, users should note that they are designed strictly for clean, dry, dust-free interior surfaces and are not suitable for high-moisture outdoor or wet-wall environments.
All features
| Model Part Number | Linari |
|---|---|
| Brand | Wall!Supply |
Extended Product Information
FAQs
Can these panels be used in a bathroom?
These panels are intended for dry interior walls and are not recommended for areas with constant moisture, such as inside a shower stall.
How many panels are in one box?
Each set includes 4 individual panels.
What is the total coverage per set?
One set covers a total area of 2.3m².
How do I cut the panels to fit my wall height?
Due to their lightweight construction, the panels can typically be trimmed using a sharp utility knife or a fine-toothed saw to fit your specific wall requirements.
Are these real marble?
No, these are HD printed 3D panels designed to replicate the appearance of marble while remaining lightweight and easy to install.
Troubleshooting
Panel is not adhering to the wall
Ensure the wall surface was cleaned of all dust, grease, and loose debris before application. Check that the adhesive used is rated for the wall material and that sufficient pressure was applied.
Visible gaps between panels
Dry-fit the panels before applying adhesive to ensure they are properly aligned. Use a level to ensure the first panel is perfectly vertical to prevent skewing as you install subsequent pieces.
Pros and Cons
Pros
- Lightweight and easy to handle during installation
- Provides a sophisticated marble aesthetic without the cost of stone
- Adds significant architectural depth through 3D ribbed detailing
- Covers a substantial 2.3m² area per set
- Simple glue-on installation process
Cons
- Not suitable for outdoor use or high-humidity environments
- Requires a perfectly flat, clean, and dry surface for optimal adhesion
- Permanent installation style (glue-based) may be difficult to remove
- Limited to specific marble-effect design aesthetic
Setup, Compatibility & Care
Installation is straightforward but requires attention to surface preparation. Ensure your wall is clean, dry, and free of any dust, peeling paint, or oils. Use a construction-grade adhesive appropriate for wall panels, applying it in lines on the back of each panel. Press firmly against the wall and ensure proper alignment for each of the 4 pieces.
For daily care, simply wipe down the panels with a soft, dry, or slightly damp microfiber cloth to remove dust. Avoid using harsh chemical cleaners or abrasive scouring pads, as these may damage the HD printed marble finish.