Nordicare Hard Wax Oil - Colourless Wood Finish - 1L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Nordicare Hard Wax Oil is designed for homeowners and DIY enthusiasts looking to protect and enhance the natural beauty of various wood types. Its key benefit is providing a durable, colourless finish that resists wear and tear while highlighting the wood's grain. A potential caveat is that achieving an even coat may require careful application on larger surfaces. This product offers a long-lasting protection for woods like Walnut, Oak, Mahogany, Dark Teak, and Cherry, enhancing their natural appearance without altering their original colour.
All features
| Model Part Number | HardWaxOil-ColourlessWoodFinish-WoodWaxOilforVariousTypesofWood(Walnut,Oak,Mahogany,DarkTeak,CherryandOthers)-MadeinDenmark(1L) |
|---|---|
| Brand | Nordicare |
Extended Product Information
FAQs
Is this product suitable for outdoor furniture?
Nordicare Hard Wax Oil is primarily designed for interior wood surfaces. While it offers durability, it may not provide sufficient protection against harsh outdoor elements like constant moisture and UV exposure.
How long does one 1L container typically last?
Coverage varies depending on the wood type and porosity, as well as the number of coats applied. Generally, 1L can cover approximately 12-16 square meters with one coat. For most furniture pieces, one container should be sufficient.
Can I use this on engineered wood or veneer?
Yes, it can be used on engineered wood and veneer, provided the surface is bare and unfinished. Apply thin coats and be cautious, as excessive moisture could potentially affect the layers of veneer.
Does this product contain any VOCs?
Please refer to the product's safety data sheet (SDS) or packaging for specific information regarding VOC content. Nordicare products are typically formulated with user safety and environmental considerations in mind.
How often should I reapply the wax oil?
The frequency of reapplication depends on usage and environmental conditions. Typically, a light reapplication every 1-3 years is recommended for high-traffic items like tabletops or flooring to maintain protection and appearance.
Can I apply a different finish over the Hard Wax Oil?
It is generally not recommended to apply other finishes like varnish or lacquer directly over Hard Wax Oil, as adhesion may be compromised. If a different finish is desired, the wax oil must be thoroughly removed first.
What is the best applicator for this product?
A high-quality synthetic brush, a lint-free cloth, or a specialized applicator pad are recommended for smooth and even application. Avoid using natural bristle brushes which may leave bristles in the finish.
Troubleshooting
Uneven finish or streaks
Apply thinner coats and ensure even distribution. Buffing with a clean cloth after drying can help blend any inconsistencies. Ensure the applicator is moving smoothly and consistently.
Wood feels sticky after application
This usually indicates the oil was applied too thickly or did not dry properly. Allow more drying time in a well-ventilated area. If still sticky, gently buff with a cloth dampened with a small amount of mineral spirits, then reapply a very thin coat and allow to dry completely.
Water spots or marks appearing
Ensure sufficient coats were applied and allowed to cure fully. Reapply a thin coat of wax oil to the affected area and allow it to dry and cure. Ensure all previous coats were fully dried before applying new ones.
Product does not seem to penetrate the wood
Verify that the wood surface is properly prepared (clean, dry, and free of existing finishes or sealants). Light sanding can help open the wood pores. Ensure the temperature is within the recommended range for application.
Pros and Cons
Pros
- Maintains the original color of the wood.
- Offers robust protection against common damages.
- Suitable for a diverse array of wood species.
- Enhances the visual appeal and texture of the wood.
- Long-lasting finish with proper application.
Cons
- Application requires care to avoid unevenness.
- May require reapplication over time depending on use.
- Not suitable for stained or pre-finished wood surfaces.
- Requires specific application tools for best results.
Setup, Compatibility & Care
Setup: Ensure the wood surface is clean, dry, and free from dust or old finishes. Lightly sand the wood if necessary to create a smooth surface. Apply the Hard Wax Oil thinly and evenly using a high-quality brush, lint-free cloth, or applicator pad. Allow the first coat to dry for the time recommended on the product packaging (typically 8-12 hours). Apply a second, and possibly a third, thin coat if needed, following the same drying procedure. Buff gently with a clean cloth after the final coat has dried to achieve a soft sheen.
Compatibility: This product is ideal for bare, unfinished wood surfaces. It is compatible with various wood types including Walnut, Oak, Mahogany, Dark Teak, Cherry, and others. It is not recommended for use over existing stains, paints, or varnish without proper preparation, as it may not adhere correctly.
Care: To maintain the finish, clean spills immediately with a damp cloth. Avoid abrasive cleaners. For periodic maintenance, a light reapplication of the Hard Wax Oil can refresh the protective layer and enhance the wood's appearance. Ensure good ventilation during application and drying.