Warren Reed Designer Bathroom Splashback - Leopard Print - 25 x 60cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Warren Reed Designer Bathroom Splashback is for homeowners looking to add a sophisticated and practical element to their bathroom. Its key benefit is transforming a basin area with a unique leopard print design while offering superior moisture and stain resistance compared to traditional tiles. A potential caveat is that its specific size (25 x 60cm) may require careful planning for different wall dimensions. This splashback is crafted from 6mm toughened glass with a high-quality print, designed to be moisture, mould, and stain-resistant, eliminating the need for grout and simplifying cleaning. It offers an easy, drill-free installation for a seamless finish.
All features
| Model Part Number | WR00152-P464 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What material is the splashback made from?
The splashback is crafted from 6mm toughened safety glass.
Does it require drilling into the wall?
No, the splashback is designed for easy installation without drilling. It typically adheres to the wall using a strong adhesive.
How do I clean the leopard print splashback?
You can clean it with a soft, damp cloth. For tougher marks, use a mild glass cleaner and a non-abrasive cloth.
Is this splashback suitable for any bathroom?
It is specifically designed for bathrooms and is resistant to moisture and stains. However, its 25cm x 60cm dimensions are best suited for standard basin areas.
Will the leopard print fade over time?
The print is of high quality and designed for durability in bathroom conditions. With proper care and avoiding abrasive cleaners, it should maintain its appearance.
Can I cut the splashback to a different size?
No, toughened glass cannot be cut after manufacturing. Ensure the 25cm x 60cm size is suitable for your intended location.
Is grout needed for installation?
No, the splashback provides a seamless, grout-free finish, eliminating the need for grout.
Troubleshooting
Splashback not adhering to the wall
Ensure the wall surface was clean, dry, and free of dust or grease before application. Check that the correct type of adhesive for glass and bathroom environments was used and that sufficient adhesive was applied. Allow adequate curing time as per adhesive instructions.
Visible water spots or streaks after cleaning
After cleaning with a damp cloth or cleaner, immediately buff the surface dry with a clean, lint-free cloth. This prevents water from evaporating and leaving mineral deposits.
Print appears damaged
This indicates potential damage from abrasive cleaning materials. Always use soft cloths and mild cleaning agents. For deep scratches, replacement may be necessary as the print is on the surface.
Pros and Cons
Pros
- Adds a unique designer touch with its leopard print.
- Highly resistant to moisture, stains, and mould, ideal for wet environments.
- Eliminates the need for grout, simplifying cleaning and maintenance.
- Easy and quick to install without drilling, preserving wall integrity.
- Durable construction from toughened safety glass ensures long-term use.
Cons
- The 25 x 60cm size may not fit all bathroom layouts without customisation.
- Print design is specific and may not suit all interior styles.
- Requires suitable adhesive for installation (check product specifics if not included).
- Glass surface can be prone to water spots if not wiped dry regularly.
- Not suitable for use behind cooking hobs or in high-heat areas.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface behind the basin is clean, dry, and smooth. Remove any existing fixtures or adhesive residue.
- Following the included instructions, apply a suitable high-strength, moisture-resistant adhesive (often provided or recommended by the manufacturer) to the back of the splashback or directly to the wall.
- Carefully position the splashback onto the wall, ensuring it is level and aligned.
- Press firmly to ensure good adhesion. Use temporary supports if necessary while the adhesive cures.
Compatibility:
- Designed for use behind bathroom basins.
- Suitable for installation on most smooth, sound wall surfaces (e.g., painted plasterboard, tiles).
- Not recommended for use near direct heat sources like ovens or stovetops.
Care:
- Clean regularly with a soft, damp cloth.
- For tougher marks, use a mild, non-abrasive glass cleaner.
- Avoid using harsh chemicals, scouring pads, or abrasive cleaners that could damage the printed surface.