UHU All Plastics Clear Glue Adhesive 33ml - UHU - 3-63166
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing a strong, transparent adhesive for plastics and various other materials. The UHU All Plastics adhesive provides a powerful bond suitable for diverse applications, from household repairs to model building. However, it's essential to note that while versatile, it may not be suitable for all types of plastics and should be used in a well-ventilated area.
All features
| Model Part Number | 3-63166 |
|---|---|
| Brand | UHU |
Extended Product Information
FAQs
What materials can I bond with UHU All Plastics?
You can bond numerous plastics (polystyrene, ABS, PVC hard), wood, paper, cardboard, leather, metals, glass, and ceramics.
Is the bond flexible?
Yes, the bond is hard but flexible, allowing for some movement without breaking.
Is UHU All Plastics waterproof?
It is resistant to water, oil, and alcohol, making it suitable for a variety of environments.
How long does it take for the adhesive to dry?
Drying time depends on the materials and conditions; however, it typically bonds in a few minutes, with full strength achieved after some time. Refer to the product instructions for exact times.
How should I store the adhesive?
Store in a cool, dry place and replace the cap immediately after use to prevent drying.
Can I use this adhesive on all types of plastics?
It's suitable for many plastics, but it is always recommended to test on a small, inconspicuous area first to ensure compatibility.
How do I clean up the adhesive?
Clean spills with a solvent such as acetone or nail polish remover while the adhesive is still wet.
Troubleshooting
Bond not holding
Ensure surfaces are clean and properly prepared. Apply a sufficient amount of adhesive and hold firmly until the bond sets.
Adhesive drying out in the tube
Make sure to tightly close the tube after each use and store in a cool, dry place. Consider buying a smaller tube if you do not use it frequently.
Visible adhesive residue
Apply a thinner layer of the adhesive. Remove excess adhesive with a solvent (like acetone or nail polish remover) before it dries.
Pros and Cons
Pros
- Versatile bonding capabilities for various materials.
- Creates a strong, durable bond.
- Temperature resistant, allowing for use in different conditions.
- Resistant to water, oil, and alcohol.
- Transparent finish ensures a clean look for repairs.
Cons
- May not be suitable for all types of plastics.
- Requires proper ventilation during use.
- Bonding effectiveness can vary depending on the materials and surface preparation.
- The adhesive film, while flexible, can be prone to cracking if the bonded materials undergo extreme stress or flexing.
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean, dry, and free from grease or dust for optimal adhesion.
- Application: Apply a thin, even layer of the adhesive to one or both surfaces. For non-porous materials, apply to both surfaces and allow to air for a few seconds before joining.
- Joining: Press the surfaces firmly together for a few seconds. Allow the bond to set completely, as per the product instructions.
- Compatibility: This adhesive is designed for plastics like polystyrene, ABS, and PVC hard, as well as materials such as wood, paper, leather and metals. Always test on a small, inconspicuous area first.
- Care: Store in a cool, dry place. Replace the cap immediately after use to prevent drying. Clean spills with a solvent like acetone or nail polish remover while still wet.