G Skill Ripjaws X Memory Kit - Blue
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This G.Skill Ripjaws X Dual Channel Memory Kit is designed for PC/Server users seeking a reliable 16GB upgrade. Its key benefit is providing enhanced multitasking and application performance through its DDR3 1600MHz speed and dual-channel configuration. A potential caveat is that it uses DDR3 technology, which is not compatible with newer DDR4 or DDR5 systems.
All features
| Colour | Blue |
|---|---|
| Series | Ripjaws X |
| Model Part Number | F3-1600C9D-16GXM |
| Brand | G Skill |
Extended Product Information
FAQs
What is CAS Latency (CL)?
CAS Latency (CL) is the delay between the memory controller telling the memory module to access a particular column in a row, and the data from that column being available. A lower CL number (like 9) generally indicates faster performance.
Can I mix these modules with other DDR3 memory?
While it's possible to mix, it's not recommended. Mixing modules with different timings, speeds, or voltages can lead to instability or the system defaulting to the slowest module's specifications. For optimal performance and stability, use modules from the same kit.
Is this memory compatible with my laptop?
No, this is a 240-pin DIMM module designed for desktop PCs and servers. Laptops use smaller SO-DIMM modules.
How do I enable XMP?
XMP (Extreme Memory Profile) is a feature found in some BIOS/UEFI settings. Enabling it allows your memory to run at its advertised speed (e.g., 1600MHz) and timings automatically. Consult your motherboard's manual for instructions on how to access and enable XMP.
What is the warranty for this memory kit?
G.Skill typically offers a Limited Lifetime Warranty on their Ripjaws X memory. Please refer to the G.Skill website for the most current warranty details and terms.
Does this memory support ECC?
No, this memory kit is Unregistered (unbuffered) and Non-ECC (Error-Correcting Code). It is intended for standard PC/Server use where ECC is not required.
Troubleshooting
Computer does not boot or beeps repeatedly.
Ensure the memory modules are fully seated in their slots. Try installing one module at a time to identify if a specific module is faulty. Check your motherboard's manual for beep code meanings.
System is unstable or crashes frequently.
Verify that the memory is correctly configured in the BIOS/UEFI. Ensure the voltage is set to 1.5V. Run a memory diagnostic tool (e.g., MemTest86) to check for errors.
System only recognizes half the installed memory (e.g., 8GB instead of 16GB).
Confirm that the modules are installed in the correct slots for dual-channel operation as specified in your motherboard manual. Ensure your operating system is 64-bit, as 32-bit systems cannot utilize more than 4GB of RAM.
Pros and Cons
Pros
- Significant upgrade for systems requiring more RAM.
- Dual-channel design boosts bandwidth for better performance.
- Includes heatsinks for better thermal management.
- Standard voltage (1.5V) ensures broad compatibility with DDR3 motherboards.
- Good balance of speed and latency for general use.
Cons
- Only compatible with DDR3 motherboards; not backward or forward compatible with other DDR types.
- Performance may be limited compared to newer DDR4 or DDR5 modules.
- Not suitable for users looking to upgrade to the latest technology.
- Requires specific motherboard slots designed for 240-pin DIMMs.
Setup, Compatibility & Care
Compatibility: Ensure your motherboard explicitly supports DDR3 Unbuffered DIMM memory with a 240-pin slot. Check your motherboard's manual or manufacturer's website for a Qualified Vendor List (QVL) to confirm compatibility. This kit is for PC/Server use and is not compatible with laptops or non-standard form factor computers.
Setup:
- Power off your computer and unplug the power cord.
- Open your computer case.
- Locate the RAM slots on your motherboard.
- Open the clips on the sides of the RAM slot.
- Align the notch on the memory module with the notch in the RAM slot.
- Press down firmly and evenly on both ends of the module until the clips snap into place.
- Close the computer case and reconnect the power cord.
- Power on your computer. The system should recognize the new memory.
Care:
- Avoid touching the gold contacts on the memory modules. Use the edges of the module to handle it.
- Keep the memory modules in a static-free environment when not installed.
- Ensure good airflow within your computer case to help the heatsinks dissipate heat effectively.
- Clean dust from the RAM slots using compressed air before installation.