SmallRig Rhinoceros Cage Kit for Sony Alpha 7 V / 7R V / 7 IV
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SmallRig Rhinoceros Cage Kit is designed for Sony Alpha 7 V, A7R V, A7 IV, and A7S III camera users seeking a lightweight yet robust handheld support system. Its primary benefit is enhanced stability and expanded accessory mounting options, while a potential caveat is its specific compatibility with the listed Sony Alpha 7 models. This kit integrates a carbon fibre-reinforced full cage, a top handle, and an HDMI cable clamp, weighing only 303g, offering a compact and corrosion-resistant solution that improves handling and rigging.
All features
| Brand | SmallRig |
|---|
Extended Product Information
FAQs
What is the weight of the SmallRig Rhinoceros Cage Kit?
The entire kit, including the cage, top handle, and HDMI clamp, weighs approximately 303 grams.
Which camera models is this cage compatible with?
This cage is designed specifically for the Sony a7 V, a7R V, a7 IV, and a7S III camera models.
Can I mount accessories to this cage?
Yes, the cage features multiple 1/4"-20 and 3/8"-16 threaded holes for attaching various accessories such as monitors, microphones, and lights.
Does the cage include a tripod mount?
Yes, the cage has an integrated Arca-type baseplate, which is compatible with Arca-type quick-release systems.
How do I clean the carbon fibre reinforced cage?
Clean with a soft, dry cloth. For tougher marks, use a slightly damp cloth, ensuring no liquid enters internal mechanisms.
Will this cage interfere with camera buttons or battery access?
The grip-wrapping design aims to maintain accessibility. However, due to the nature of cages, some users might find minor adjustments needed for certain ports or controls. Test access after initial setup.
What is the main benefit of using this cage kit?
The main benefit is providing a lightweight, durable, and stable platform with expanded accessory mounting capabilities for compatible Sony Alpha 7 series cameras.
Troubleshooting
Camera not sitting flush in the cage
Loosen the baseplate screw slightly, align the camera's tripod mount with the screw, and then retighten securely. Ensure no debris is present.
Accessory screw won't thread into mounting point
Verify you are using the correct screw size (1/4"-20 or 3/8"-16). Check the mounting hole for any obstructions or damaged threads.
HDMI cable clamp interferes with port access
Adjust the position of the clamp along its mounting slots to find the optimal angle that secures the cable without obstructing the HDMI port.
Cage feels loose on the camera
Ensure the primary 1/4"-20 camera mounting screw is fully tightened. Check if any anti-twist pins are properly engaged with the camera body, if applicable.
Pros and Cons
Pros
- Significantly improves camera handling and stability for handheld shots.
- Offers extensive mounting points for diverse accessories.
- Lightweight design minimizes added bulk to the camera setup.
- Quick release plate compatible with Arca-type systems saves time during setup changes.
- Durable and corrosion-resistant materials ensure longevity.
Cons
- Exclusively designed for specific Sony Alpha 7 models; not universally compatible.
- May add some bulk compared to using the camera without any cage.
- The compact design might slightly impede access to certain camera ports for some users.
- Requires an additional purchase of compatible accessories to fully utilize mounting points.
Setup, Compatibility & Care
Setup:
- Attach the camera to the cage using the integrated 1/4"-20 screw in the baseplate. Ensure the camera is snug and secure.
- Install the HDMI cable clamp by attaching it to the designated points on the cage, routing the HDMI cable, and tightening the clamp screw.
- Mount the top handle to the designated cold shoe or threaded mount on the top of the cage.
- Attach any additional accessories (e.g., magic arms, microphones) to the available 1/4"-20 or 3/8"-16 threaded holes.
Compatibility:
This cage kit is specifically designed for the Sony a7 V, a7R V, a7 IV, and a7S III camera bodies. Ensure your camera model is within this list before purchase.
Care:
- Clean the cage periodically with a soft, dry cloth to remove dust and fingerprints.
- For stubborn smudges, use a slightly damp cloth, avoiding direct moisture on any electronic components or internal mechanisms.
- Store the cage in a dry environment when not in use to prevent corrosion.
- Periodically check all screws and mounting points to ensure they remain tight.