Set Of 5 Fire Rated LED Bathroom Downlights - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you understand and effectively use the First Choice Lighting Set of 5 Fire Rated LED Bathroom Downlights. Designed for safe and stylish illumination in bathrooms and other areas, these downlights offer long-lasting, energy-efficient lighting. Note that proper installation is crucial, especially regarding fire-rated ceilings and electrical safety.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 29896X5 |
| Brand | First Choice Lighting |
Extended Product Information
FAQs
Are these downlights suitable for all bathroom zones?
Yes, they are suitable for bathroom zones 1, 2, and 3 due to the IP65 rating.
What is the lifespan of the LED lights?
The LEDs have a lifespan of 30,000 hours.
Can I use these lights with a dimmer switch?
Yes, they are compatible with standard household dimmer switches.
What is the color temperature of the lights?
The color temperature is 4000K (Cool White).
What is the beam angle?
The beam angle is 40 degrees.
What is the required cut-out size?
The required cut-out size is 7.5 cm.
Are these downlights fire-rated?
Yes, they are fully tested for installation in 90-minute fire-rated ceilings.
What is the minimum cavity depth needed?
The minimum cavity depth needed is 15 cm.
Troubleshooting
Lights do not turn on.
Check the power supply and connections. Ensure the circuit breaker is not tripped.
Lights flicker.
Check the dimmer switch compatibility and replace if necessary. Ensure the wiring is secure.
Lights are not bright enough.
Verify the dimmer setting is not too low. Confirm that the lights are receiving the correct voltage.
Pros and Cons
Pros
- Energy-efficient LED technology.
- Suitable for bathroom use with IP65 rating.
- Compatible with dimmer switches for adjustable lighting.
- Long lifespan of 30,000 hours.
- Fire-rated design for safety.
- Easy to install with the included components.
Cons
- Requires a cut-out of 7.5 cm.
- Minimum cavity depth of 15 cm is needed for installation.
- Installation must comply with electrical regulations.
- Only available in a cool white (4000K) color temperature.
- Professional installation may be required for optimal safety and performance.
Setup, Compatibility & Care
Setup:
- Ensure the power is turned off before starting the installation.
- Cut a 7.5 cm hole in the ceiling, ensuring a minimum cavity depth of 15 cm.
- Connect the downlight to the mains power supply, following all electrical safety guidelines.
- Place the downlight into the cut-out and secure it properly.
Compatibility:
- These downlights are compatible with standard household dimmer switches.
- They are designed for use in 90-minute fire-rated ceilings.
Care:
- Clean the downlights with a soft, damp cloth.
- Avoid using harsh chemicals or abrasive cleaners.
- Regularly check for any signs of damage or wear.