AK Interactive Spray Paints - Great White Base 150ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This AK Interactive Great White Base Spray is designed for model painters seeking exceptionally vibrant and saturated colors. Its key benefit is an ultra-white, high-opacity finish that dramatically enhances the intensity of subsequent paint layers. A minor caveat is the need for proper can cleaning after each use to prevent nozzle clogs. This product provides a quick-curing, ultra-resistant synthetic lacquer basecoat that simplifies achieving brilliant color results.
All features
| Model Part Number | 1019 |
|---|---|
| Brand | AK Interactive |
Extended Product Information
FAQs
How long does the spray take to dry?
The synthetic lacquer formulation is designed to cure quickly, typically allowing for recoating within minutes to an hour, depending on environmental conditions.
Can I use this on metal models?
Yes, this base coat is suitable for various model materials, including plastic and metal, providing it is clean and free from contaminants.
What is the best distance to spray from?
For optimal coverage and to avoid runs, hold the can approximately 20-30 cm (8-12 inches) away from the model surface.
How do I prevent the nozzle from clogging?
Always turn the can upside down and spray for a few seconds after you finish painting until only clear propellant comes out. This clears the paint from the nozzle.
Will this base coat cover minor imperfections?
The high opacity helps to cover minor surface blemishes and previous paint layers, providing a uniform starting point. However, significant imperfections should be addressed before application.
What kind of ventilation is required?
As with most spray paints, it is recommended to use this product in a well-ventilated area to avoid inhaling fumes.
How many models can I paint with one can?
Coverage varies depending on the size of the models and the thickness of the coats applied. A 150ml can typically provides sufficient base for several small to medium-sized scale models.
Troubleshooting
Uneven spray or sputtering
Shake the can more vigorously for a longer period. Ensure the nozzle is not clogged by performing the post-use cleaning procedure.
Paint not adhering well
Ensure the surface to be painted is clean, dry, and free from dust or grease. Verify adequate shaking of the can.
Nozzle clog after use
Immediately after spraying, turn the can upside down and spray until clear propellant emerges. If already clogged, attempt to clean the nozzle with a suitable solvent or replace the nozzle if possible.
Color appears dull
Ensure the can was shaken for the recommended duration. The white base needs to be applied evenly and opaquely for maximum effect. Apply subsequent colors once the base coat is fully cured.
Pros and Cons
Pros
- Significantly boosts the intensity and saturation of subsequent paint colors.
- Quick drying time allows for faster project completion.
- Creates a durable and resistant surface for painted models.
- Easy and convenient spray application for even coats.
- Ideal for achieving professional-looking vivid color effects.
Cons
- Requires careful cleaning after each use to prevent nozzle blockage.
- Specific use case as a white base coat may not be suitable for all painting styles.
- Synthetic lacquer requires adequate ventilation during use.
Setup, Compatibility & Care
Setup:
Ensure the application area is well-ventilated. Shake the spray can vigorously for at least one minute before use to properly mix the contents.
Application:
Hold the can approximately 20-30 cm away from the surface and apply in short, even strokes. Multiple thin coats are preferable to one heavy coat for best results.
Compatibility:
This synthetic lacquer base is designed to be compatible with most acrylic and lacquer-based paints used in scale modeling. It creates a resistant surface suitable for further weathering and detailing.
Care:
Crucially, after each use, turn the can upside down and spray for a few seconds until only propellant is released. This clears the nozzle and internal mechanism, preventing clogs and ensuring the can is ready for future use.