Mains Electric Fence Energiser Charger - 230V - 120Km - 5J
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SecureFix Direct Mains Electric Fence Energiser is designed for users needing a robust and reliable power source for extensive fencing needs, offering up to 120KM coverage for agricultural, wildlife, or security applications. Its key benefit is providing a powerful, consistent, and low-maintenance electric fence solution. A potential caveat is its mains power dependency, requiring a consistent power source.
All features
| Model Part Number | SFAGEFEE120500 |
|---|---|
| Brand | Fensecure |
Extended Product Information
FAQs
What is the maximum fence length this energiser can support?
This energiser is engineered to power electric fencing systems up to an incredible 120 kilometers in length.
Is this energiser suitable for all types of animals?
Yes, it is suitable for a wide range of animals, including livestock and for deterring wildlife, due to its powerful and consistent output.
What does the IP54 waterproof rating mean?
IP54 means the unit is protected against dust ingress and splashing water from any direction, making it suitable for outdoor use in various weather conditions.
Do I need to purchase additional components to install it?
The energiser arrives as a complete, ready-to-install kit, meaning setup is quick and straightforward. However, you will need to connect it to your existing or new electric fencing components.
How do I ensure optimal grounding for the fence?
Optimal grounding is crucial for performance. Use properly sized grounding rods (typically 1-meter long) driven into moist soil, spaced at least 3 meters apart, and connect them to the energiser's ground terminal.
Can this energiser be used with solar power?
No, this is a mains-powered energiser and requires a direct connection to a 230V mains power supply. It is not designed for solar or battery operation.
What is the voltage output of this energiser?
The energiser operates on a 230V input voltage and delivers a powerful electric pulse suitable for long-distance fencing.
Troubleshooting
Energiser not powering the fence
Check that the unit is securely plugged into a working 230V mains outlet. Verify that the power cord and fence connections are secure and free from damage. Ensure the grounding system is properly installed and connected.
Low fence voltage output
Inspect all fence connections for loose wires or corrosion. Check for any shorts in the fencing line (e.g., wires touching vegetation or broken insulators). Ensure the grounding system is adequate, especially in dry soil conditions; consider adding more grounding rods.
Unit shows no lights or activity
Confirm the mains power supply is active. Check the fuse in the power cord if applicable. If the issue persists, the unit may require professional inspection.
Water ingress into the unit
Although rated IP54, severe water exposure can still occur. If water is visible, immediately disconnect from mains power and allow the unit to dry completely in a warm, dry place before attempting to use it again. Inspect for any signs of corrosion.
Pros and Cons
Pros
- Powers very large areas (up to 120km).
- Provides consistent and reliable electric pulses.
- Durable and water-resistant construction for all-weather use.
- Simple and flexible installation options.
- Designed for low maintenance, saving time and effort.
- Comes as a complete, ready-to-use kit.
Cons
- Requires a mains power connection, limiting placement flexibility.
- Potential for damage from severe weather if not properly protected (despite water resistance).
- Initial setup might require basic electrical knowledge for safety.
- Not portable; requires a permanent power source.
- 5 Joules might be excessive for smaller, non-critical applications.
Setup, Compatibility & Care
Setup:
- Mount the energiser securely on a fence post or wall using the integrated mounting hooks.
- Connect the energiser's live and earth leads to your electric fencing system according to local regulations and safety guidelines.
- Connect the energiser to a suitable, grounded 230V mains power outlet using the provided power cord.
- Ensure all connections are secure and properly insulated.
Compatibility:
This energiser is designed for use with standard electric fencing components, including poly wire, poly tape, and poly rope. It is compatible with systems up to 120 kilometers in length. Ensure any grounding rods used are adequately spaced and connected.
Care:
- Keep the energiser clean by wiping it with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Ensure the ventilation openings are kept clear of dust and debris to prevent overheating.
- Periodically inspect the power cord and connections for any signs of wear or damage.
- While water-resistant (IP54), avoid prolonged direct exposure to heavy rain or extreme environmental conditions if possible.
- Regularly test the fence voltage to ensure optimal performance.