Crystal Clear Deep Pour Epoxy Resin Kit - Craft Resin
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Craft Resin Crystal Clear Deep Pour Epoxy Resin Kit is designed for artists and crafters looking to create stunning, thick resin pours with minimal effort. Its key benefit is the ability to achieve a flawless, glass-like finish in single layers up to 2 inches deep, saving time and eliminating the need for multiple pours. A minor caveat is the requirement for precise mixing ratios to ensure optimal curing and bubble release. This kit offers a user-friendly experience with an upgraded bubble-release formula, a quick cure time, and food-safe certification, making it ideal for a wide range of projects.
All features
| Brand | Craft Resin |
|---|
Extended Product Information
FAQs
What is the maximum pour depth for this resin?
This kit is specifically designed for deep pours, allowing for safe, single-layer pours up to 2 inches thick.
How long does it take for the resin to cure?
The resin cures to a rock-hard state in approximately 48 hours. It can be handled after this time, but full strength and heat resistance are achieved over a few days.
Is this resin safe for food contact applications?
Yes, Craft Resin Deep Pour Epoxy Resin is certified food-grade, making it safe for use on items like serving trays, coasters, and countertops once fully cured.
What is the mixing ratio for the resin and hardener?
The mixing ratio is 2 parts resin to 1 part hardener by volume.
How do I clean up uncured resin?
Uncured resin can be cleaned up using isopropyl alcohol. For cured resin, use a soft, damp cloth and mild soap if necessary.
Can I use this resin for thin pours or coatings?
While designed for deep pours, it can be used for thinner pours or coatings. However, for very thin applications, a product formulated specifically for coatings might yield slightly different results.
What is the working time?
The working time is longer compared to standard epoxy resins, allowing more time for pouring and manipulation, especially beneficial for larger projects.
Troubleshooting
Sticky or uncured resin
Ensure accurate 2:1 mixing ratio. Stir thoroughly for the recommended time. Check ambient temperature; it should be between 70-75°F (21-24°C). Ensure no moisture contamination.
Excessive bubbles
Stir slower to avoid whipping air in. Gently warm the resin before mixing to reduce viscosity. Use a heat gun or torch carefully on the surface after pouring to pop surface bubbles. Consider a longer working time if bubbles persist.
Yellowing of the resin
Ensure you are using the correct resin and hardener. Avoid over-mixing or mixing at temperatures above the recommended range. Protect finished pieces from prolonged UV exposure.
Surface imperfections (orange peel, waves)
Ensure resin is level during curing. Check for consistent stirring. If using pigments, ensure they are fully incorporated. A light sanding and recoat may be necessary for severe issues.
Pros and Cons
Pros
- Allows for thick, single-layer pours up to 2 inches, saving considerable time.
- Advanced formula significantly reduces bubbles for a clear, flawless finish.
- Certified food-safe and non-toxic, providing peace of mind for various applications.
- Quick 48-hour cure time and high heat resistance enhance durability.
- Comprehensive kit includes all necessary accessories for immediate use.
- Improved flow and bubble release make it easier for beginners and experienced users alike.
Cons
- Requires precise 2:1 mixing ratio; inaccuracies can affect cure and finish.
- Longer working time might necessitate longer waiting periods for recoating if not planning a single deep pour.
- While heat resistant, it's not a replacement for high-temperature surfaces.
- Requires a controlled environment for optimal curing (temperature and humidity).
Setup, Compatibility & Care
Setup:
- Preparation: Ensure your workspace is well-ventilated, clean, and at a stable temperature (ideally 70-75°F or 21-24°C). Protect your work surface.
- Mixing: Measure the resin and hardener precisely using the 2:1 ratio (e.g., 2 parts resin to 1 part hardener) into a clean mixing bucket. Use the provided pumps for accuracy.
- Stirring: Stir thoroughly for 3-5 minutes, scraping the sides and bottom of the bucket to ensure all components are fully combined. Avoid whipping the mixture, which can introduce excess bubbles.
- Pouring: Pour the mixed resin into your mold or project area. If pouring multiple layers, allow the previous layer to reach a gel state before pouring the next.
Compatibility:
- Suitable for use with silicone molds, wood, concrete, and other inert materials.
- Avoid mixing with pigments or additives not specifically designed for epoxy resin, as they may affect curing properties.
- Test any new pigments or materials on a small scale first.
Care:
- Clean uncured resin spills immediately with isopropyl alcohol.
- For cured resin, clean with a soft, damp cloth. Avoid abrasive cleaners or solvents, which can dull the finish.
- Protect finished pieces from prolonged direct sunlight to prevent potential yellowing over many years.
- While heat resistant, avoid placing extremely hot items directly on the surface.