This white external angle joint is suitable for use with 50mm by 50mm MK conduit trunking.
Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone using the MK White 50mm External 90° Angle Joint with MK conduit trunking. The key benefit is a clean, professional finish for your cable management. However, ensure accurate measurements before cutting and installing to avoid wasted materials.
| Colour | White |
|---|---|
| Brand | MK |
You'll typically need a measuring tape, a saw for cutting the trunking, a screwdriver or drill (for screws), and potentially adhesive if that's your preferred method.
No, this joint is designed for use with MK 50mm x 50mm conduit trunking only.
You can use screws or adhesive. Screws are often provided or recommended by the manufacturer. Follow the instructions for your chosen method.
While the joint is white, and designed to match the trunking, you may be able to paint it. Test in an inconspicuous area first.
Unfortunately, you will need a new piece of trunking. Accurate measurement is critical.
Use a damp cloth to wipe away dust and dirt. Avoid harsh chemicals or abrasive cleaners.
Double-check the measurements of the trunking and ensure it's cut correctly. Verify that the trunking size matches the joint's specifications (50mm x 50mm).
Ensure that screws or adhesive are properly applied and tightened or secured. If using adhesive, allow sufficient time for it to cure according to the manufacturer's instructions.
Make sure you have the correct white joint from MK. Check the packaging to confirm the color.
Setup:
Compatibility:
Care:
