Green Smart JV35 Anti-Dust Mite Vacuum - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Green Smart JV35 is an essential tool for allergy sufferers and homeowners seeking a deeper clean for upholstery, mattresses, and carpets. By combining 700W of power with 60°C heat and 253.7nm UV light technology, this device effectively neutralizes dust mites and bacteria at the source. While it is highly efficient at sanitizing soft surfaces, its specialized design is meant for targeted cleaning rather than general floor vacuuming, making it a supplementary appliance rather than a replacement for your primary floor vacuum.
All features
| Colour | Grey |
|---|---|
| Series | JV35 |
| Model Part Number | 369827 |
| Brand | Green Smart |
Extended Product Information
FAQs
Can I use the JV35 on hardwood floors?
This device is specifically designed for soft surfaces like mattresses, sofas, and carpets; it is not recommended for hardwood flooring.
How often should I clean the filters?
We recommend inspecting the filters after each use and rinsing them once every two weeks depending on usage frequency.
Is the UV light safe for pets and children?
The UV lamp is shielded and includes safety sensors that turn off the light when the unit is lifted from the surface to prevent accidental exposure.
What is the total power consumption?
The Green Smart JV35 operates at a total power of 700W.
How long is the power cord?
The vacuum features a 5-meter power cord, providing ample reach for most bedrooms and living areas.
Is the vacuum heavy to push?
No, the unit is lightweight at only 2.6kg, making it easy to maneuver across beds and furniture.
Troubleshooting
Device experiences loss of suction
Check the 0.5L dust container for clogs, empty it, and ensure the 6-stage filtration system is clean and correctly installed.
The roller brush stops spinning
Unplug the unit and inspect the 45mm anti-winding brush for large debris or hair buildup that may be obstructing the motor.
UV light does not appear to be turning on
Ensure the device is firmly pressed against the surface; safety sensors often disable the UV lamp when the vacuum is lifted.
Pros and Cons
Pros
- Dual-action sterilization using both heat and UV-C light
- Lightweight 2.6kg design ensures easy maneuverability
- Efficient cyclonic filtration captures fine allergens
- Quiet operation at under 68dB
- Large 245mm suction port for broad coverage
Cons
- Not intended for general floor cleaning
- Wired operation limited to 5m cord length
- Small 0.5L dust container requires frequent emptying
Setup, Compatibility & Care
To begin, simply connect the vacuum to a standard power outlet using the 5m cord. Before operation, ensure the 0.5L dust container is properly seated and the filter is dry if it has been recently cleaned. To maintain peak performance, empty the dust container after every use to prevent suction loss. The fine steel mesh filters should be rinsed with cold water periodically; ensure they are completely air-dried before reinserting. Keep the UV-C light area clean and free of debris to ensure the light successfully hits the target surface. Avoid using the device on damp surfaces to protect the internal electrical components.