Big Boy Plastic Flexi Filler - Silverhook - 250ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Silverhook's Big Boy Plastic Flexi Filler to repair plastic surfaces. The product provides an easy-to-apply and flexible solution for dented and damaged plastic bumpers, offering excellent sanding properties. However, ensure proper surface preparation for optimal adhesion.
All features
| Model Part Number | BIG31 |
|---|---|
| Brand | Silverhook |
Extended Product Information
FAQs
What surfaces can I use this filler on?
You can use this filler on ABS, PVR, PVC, GRP, Aluminium, and Wood.
How do I prepare the surface before applying the filler?
Clean the surface thoroughly to remove any dirt, oil, grease, or loose paint. Lightly sand the area to improve adhesion.
How do I mix the filler?
Mix the two components thoroughly according to the manufacturer's instructions until you achieve a consistent color and texture.
How long does it take for the filler to dry?
Drying times can vary. Refer to the product instructions for specific drying times under various conditions.
Can I sand the filler after it has dried?
Yes, this filler offers excellent sanding properties even after leaving overnight. Use sandpaper to achieve a smooth finish.
What safety precautions should I take?
Always wear gloves and eye protection when working with this product. Ensure adequate ventilation in the work area.
Can I paint over the filler?
Yes, once the filler is fully cured and sanded smooth, it can be painted. Use paints suitable for plastics.
Troubleshooting
Filler not adhering properly
Ensure the surface is properly cleaned and prepared. Roughen the surface with sandpaper to improve adhesion.
Filler is too hard to sand
Make sure you allow enough time for the filler to cure completely. Use appropriate grit sandpaper, starting with a coarser grit and gradually moving to finer grits.
Filler cracking after application
Ensure the filler is applied in thin layers. Avoid applying too much filler at once. Check for compatibility with the plastic.
Filler not curing
Ensure the correct ratio of components is mixed. Make sure the product is not past its expiry date.
Pros and Cons
Pros
- Easy to apply, saving time and effort.
- Excellent sanding properties, allowing for a smooth finish.
- High elasticity to fill and repair various plastic types.
- Suitable for use on a wide range of surfaces, increasing versatility.
- Corrosion-resistant, enhancing the durability of repairs.
- Comes in a convenient 250ml size.
Cons
- Requires mixing of two components, adding an extra step.
- Proper surface preparation is crucial for optimal adhesion.
- May require multiple coats for deep damage.
- Sanding may create dust, requiring proper safety measures.
- Not suitable for structural repairs.
- Specific application instructions must be followed carefully.
Setup, Compatibility & Care
- Preparation: Ensure the surface is clean, dry, and free from oil, grease, or loose particles. Use a degreaser if necessary.
- Mixing: Mix the two components thoroughly according to the manufacturer's instructions, ensuring a homogenous mixture.
- Application: Apply the mixed filler within the recommended working time.
- Compatibility: This filler is compatible with ABS, PVR, PVC, GRP, Aluminium, and Wood.
- Care: After application, avoid exposure to extreme temperatures or harsh chemicals until fully cured. Always wear appropriate safety equipment, such as gloves and eye protection.