TecMate Optimate Lithium LFP 4S 0.8A Battery Saving Charger & Maintainer
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps owners of 12.8V/13.2V LiFePO4 / LFP batteries, particularly those in off-road, moto-cross, and race motorcycles, understand and effectively use the TecMate Optimate Lithium LFP 4S 0.8A Battery Saving Charger & Maintainer. The charger extends battery life and ensures optimal performance through its 8-step charging process. Keep in mind that this charger is specifically designed for Lithium Iron Phosphate (LiFePO4 / LFP) batteries and is not compatible with other battery types.
All features
| Model Part Number | Does Not Apply |
|---|---|
| Brand | Tecmate |
Extended Product Information
FAQs
What type of batteries does this charger support?
This charger is designed for 12.8V-13.2V LiFePO4 / LFP batteries only.
Can I use this charger for lead-acid batteries?
No, this charger is not compatible with lead-acid batteries.
What is the charging current?
The charger provides a 0.8A output.
How long does it take to charge a battery?
Charging time varies depending on the battery's capacity and discharge level. Refer to the battery's specifications for more details.
Does the charger have overcharge protection?
Yes, the charger automatically stops charging when the battery is full.
Can I leave the charger connected to the battery for a long time?
Yes, the charger is designed for long-term maintenance. It will switch to maintenance mode after charging.
What should I do if the charger is not working?
Check the power connection, ensure the battery is correctly connected, and consult the troubleshooting guide.
Troubleshooting
Charger does not turn on.
Check the power outlet and ensure the charger is properly connected. Verify the fuse (if applicable).
Battery is not charging.
Ensure correct polarity when connecting to the battery. Check for defective batteries, the charger may not initiate charging if a defect is detected. Check the battery voltage to ensure it is within the charger's operating range.
Charger gets hot.
Ensure the charger has adequate ventilation. If it overheats, disconnect it from the power source and have it inspected.
Charging time seems excessive.
This is normal, especially for deeply discharged batteries. If the issue persists, check the battery's condition.
Pros and Cons
Pros
- Extends battery life through optimized charging.
- Recovers deeply discharged batteries.
- Ensures safe operation by preventing charging of defective batteries.
- Automatically adjusts charging speed.
- Designed for LiFePO4 / LFP batteries commonly used in motorcycles.
- Maintains batteries during seasonal storage.
Cons
- Specifically for LiFePO4 / LFP batteries only.
- Limited to 0.8A output, which might be slow for very large batteries.
- Not suitable for other battery chemistries, such as lead-acid or AGM.
- Requires proper understanding of battery type compatibility.
- May not fully recover severely damaged batteries.
Setup, Compatibility & Care
- Connecting the Charger:
- Connect the charger to the battery terminals, ensuring correct polarity (red to positive, black to negative).
- Plug the charger into a standard AC power outlet.
- The charger will automatically begin the charging process.
- Compatibility:
- This charger is exclusively for 12.8V-13.2V LiFePO4 / LFP batteries.
- Check your battery's specifications to ensure compatibility before use.
- Care Instructions:
- Always disconnect the charger from the power outlet and the battery when not in use.
- Store the charger in a dry, clean place.
- Clean the charger with a dry cloth; do not use solvents or abrasive cleaners.