Envirovent Extractor Fan - Profile100T
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Envirovent Profile 100T is designed for homeowners and contractors seeking an unobtrusive and efficient ventilation solution for bathrooms and WCs. Its key benefit lies in its ultra-slim profile, which blends seamlessly into modern interiors while providing effective moisture and odor removal. A potential caveat to consider is that this specific model (Profile100T) includes an adjustable timer, which might be unnecessary for simpler installations. This 100mm axial extractor fan is easy to install, energy-efficient, and operates quietly.
All features
| Model Part Number | Profile100T |
|---|---|
| Brand | Envirovent |
Extended Product Information
FAQs
What is the purpose of the adjustable timer?
The adjustable timer allows the fan to continue running for a set period (1-30 minutes) after the light or switch is turned off, ensuring any remaining moisture or odors are cleared from the room.
Can this fan be installed in a shower cubicle?
The fan itself is not designed for direct exposure to water spray. It should be installed outside the immediate shower cubicle area, typically in the main bathroom or WC space, in accordance with building regulations regarding fan placement and electrical safety.
How often should I clean the fan?
It is recommended to clean the fan grille and blades every 3-6 months, or more frequently if you notice reduced airflow or dust accumulation.
What is the diameter of the ducting required?
The Envirovent Profile 100T requires 100mm (4-inch) diameter ducting.
Is this fan suitable for a kitchen?
While it can be used in a kitchen, it is primarily designed for bathrooms and WCs. For kitchens, a higher airflow rate might be necessary, and specific kitchen extractor fans are usually recommended.
Does this model have a pull cord?
The 'T' in Profile100T typically denotes the timer function. This specific model does not come with a pull cord. Other variants in the Envirovent Profile 100 range may offer pull cord or humidity sensor options.
What is the power consumption?
The fan consumes a low 13 Watts of power.
Troubleshooting
Fan does not turn on
Check the mains power supply. Ensure the circuit breaker is on and the wiring is correctly connected by a qualified electrician.
Fan is noisy or vibrates
Ensure the fan is securely mounted. Check that no wires or debris are obstructing the fan blades. Clean the fan blades if they are dirty.
Fan runs continuously or not long enough after switching off
Verify the timer adjustment. If the fan is wired to a light switch, the timer function operates independently; if wired to a separate switch, ensure it's correctly connected for timer operation. Consult an electrician if unsure.
Low airflow
Check the ducting for kinks or blockages. Ensure the fan grille is clean and free from dust or debris.
Pros and Cons
Pros
- Highly discreet and aesthetically pleasing design
- Quiet operation at 40 dB(A)
- Low energy consumption (13W)
- Adjustable timer function for efficient moisture removal
- Easy to install on walls or ceilings
- Durable with sealed-for-life ball bearing motors
Cons
- Timer function may be unnecessary for some basic installations
- Only one speed setting
- Requires an electrical connection, not battery-powered
- No pull-cord or humidity sensor on this specific 'T' model (check other variants if needed)
Setup, Compatibility & Care
Setup:
- Mounting: The fan can be mounted directly into a wall or ceiling. Ensure a suitable location is chosen, away from obstructions, and that the correct diameter ducting (100mm) is used.
- Electrical Connection: This fan requires a mains electrical connection. It is recommended that installation is carried out by a qualified electrician.
- Timer Adjustment: Access the timer adjustment screw (usually located within the fan housing) to set the desired overrun time between 1 and 30 minutes. Refer to the manufacturer's manual for precise location and adjustment.
Compatibility:
- Ducting: Compatible with standard 100mm (4-inch) flexible or rigid ducting.
- Power Supply: Requires a 220-240V AC mains power supply.
Care:
- Cleaning: Regularly clean the fan grille and fan blades to maintain airflow efficiency. Disconnect power at the mains before cleaning. Use a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Motor: The motor is sealed-for-life and does not require lubrication.