Loctite 495 Instant Adhesive - 20g
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Loctite 495 Instant Adhesive, a general-purpose adhesive designed for bonding a variety of materials quickly. It's ideal for small components and parts, offering a fast bonding time for plastics, rubbers, and metals. Keep in mind that for polyolefins, a primer is required.
All features
| Model Part Number | 1920911 |
|---|---|
| Brand | Loctite |
Extended Product Information
FAQs
What materials can I bond with Loctite 495?
Loctite 495 works well on plastics, rubbers, and metals.
Do I need a primer?
Yes, if you're bonding polyolefins, you will need Primer LOCTITE 770 or LOCTITE 7239.
How should I store Loctite 495?
Store in a cool, dry place away from direct sunlight.
What is the shelf life of Loctite 495?
The shelf life depends on storage conditions, but it's best used within 12 months after opening.
How quickly does Loctite 495 bond?
Loctite 495 has a fast bonding time, usually within seconds, depending on the materials.
Is Loctite 495 suitable for outdoor use?
While it can be used outdoors, long-term exposure to the elements may affect the bond. Test in a small area first.
How do I clean up Loctite 495?
Uncured adhesive can be cleaned with solvents like acetone. Once cured, it's more difficult to remove.
Troubleshooting
Bond not holding.
Ensure surfaces are clean. Apply a sufficient amount of adhesive. Hold the parts together for the recommended time.
Adhesive drying out quickly.
Ensure the cap is tightly closed after each use and store the adhesive in a cool, dry place.
Poor bonding on polyolefins.
Use Primer LOCTITE 770 or LOCTITE 7239 before applying Loctite 495.
Pros and Cons
Pros
- Fast bonding time minimizes waiting periods.
- Bonds a broad spectrum of materials.
- Easy to apply due to low viscosity.
- Transparent finish ensures a clean bond line.
- Effective for small parts and close-fitting components.
Cons
- Requires Primer for polyolefins.
- Bond strength can be affected by improper application.
- May not be suitable for all types of materials or applications.
- Limited open time for adjustments.
Setup, Compatibility & Care
Setup:
- Ensure surfaces are clean and free of contaminants.
- Apply a thin layer of Loctite 495 to one surface.
- Bring the surfaces together and hold them firmly for a few seconds.
- For polyolefins, use Primer LOCTITE 770 or LOCTITE 7239 before applying the adhesive.
Compatibility:
Loctite 495 is compatible with: plastics, rubbers, and metals. Always test on a small, inconspicuous area first.
Care:
- Store in a cool, dry place.
- Avoid prolonged exposure to direct sunlight.
- Keep out of reach of children.