Walltastic Jungle Adventure Wall Mural - Multicolor
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to transform a room with the Walltastic Jungle Adventure Wall Mural. The mural offers a vibrant jungle scene, covering a large area for an immersive experience. Keep in mind that proper wall preparation is essential for the best results.
All features
| Colour | Multicolor |
|---|---|
| Brand | Walltastic |
Extended Product Information
FAQs
What is the size of the mural?
The mural covers a wall area of up to 8ft x 10ft (243.84cm x 304.80cm).
What method of application is used?
The paste-the-paper method is used.
What is the brand of the wall mural?
The brand of the wall mural is Walltastic.
How do I apply the mural?
Apply wallpaper paste to the back of each panel, let it soak for 1-2 minutes, and then apply it to the wall, overlapping edges by approximately 6mm.
What should I do if the seams are visible?
Ensure the panels overlap by approximately 6mm as instructed, and smooth the edges with a seam roller or soft cloth.
What should I do if there are air bubbles?
Use a soft cloth to smooth out the air bubbles, working from the center of the panel outwards.
Is there a warranty?
Please refer to the product packaging or retailer for warranty information.
Troubleshooting
Panels are not sticking to the wall.
Ensure the wall surface is properly prepared, the paste is applied evenly, and the soaking time is followed. Use a soft cloth to firmly press the panels against the wall.
Seams are visible after drying.
Ensure the panels are overlapped by approximately 6mm as instructed. Use a seam roller or soft cloth to smooth out the edges.
Air bubbles are present under the mural.
Use a soft cloth to gently smooth out the air bubbles, working from the center of the panel outwards.
Pros and Cons
Pros
- Transforms rooms with a vibrant jungle scene.
- Easy to apply due to the panel design.
- Comes with clear, step-by-step instructions.
- Offers a large coverage area.
- The panel design allows for flexible application.
Cons
- Requires wall preparation before application.
- Paste-the-paper method may require some experience or patience.
- The overlap design needs to be applied carefully to achieve a seamless finish.
- May require assistance during application.
Setup, Compatibility & Care
- Preparation: Ensure the wall surface is clean, dry, and smooth. Remove any existing wallpaper or imperfections.
- Paste Application: Apply the wallpaper paste evenly to the back of each panel.
- Soaking Time: Allow the panels to soak for 1-2 minutes before application. Do not lay the pasted sheets on top of each other.
- Panel Placement: Apply the panels to the wall, following the printed guidelines on each panel.
- Overlap: Overlap all joining edges by approximately 6mm.
- Smoothing: Use a soft cloth to smooth out any air bubbles.
- Drying: Allow the paper to dry completely.
- Trimming: Trim the excess edges carefully after the paper has dried.