Origin Storage 32GB DDR5 5600MHz UDIMM 2Rx8 Non-ECC 1.1V

Currently unavailable

Currently unavailable
This high-performance memory module from Origin Storage is designed for desktop users seeking enhanced speed and multitasking capabilities. Its key benefit is the rapid 5600MHz DDR5 performance, which significantly boosts application responsiveness and system throughput. A caveat for users is that it is Non-ECC, meaning it's best suited for general computing rather than mission-critical applications requiring error detection.
| Brand | Origin Storage |
|---|
DDR5 offers significantly higher bandwidth, improved power efficiency, and greater scalability for higher capacities and speeds compared to DDR4.
No, DDR5 and DDR4 are not compatible. Motherboards are designed for either DDR4 or DDR5, not both simultaneously.
It means the module has two ranks (2R), and each rank is composed of eight memory chips (x8). This configuration helps increase memory bandwidth.
Yes, the 32GB capacity and 5600MHz speed are excellent for modern gaming. However, ensure your motherboard and CPU support DDR5.
Please refer to Origin Storage's official website or your purchase receipt for specific warranty information, as it can vary.
You may need to enable an XMP (Extreme Memory Profile) or EXPO (Extended Profiles for Overclocking) profile in your system's BIOS/UEFI settings to achieve the rated speed.
Ensure the module is fully seated in the RAM slot. Try booting with a single module if you have multiple. Check motherboard QVL for compatibility. Ensure your BIOS is up-to-date.
Reseat the module. Verify compatibility with your motherboard and CPU. Check system BIOS settings. If using multiple modules, ensure they are installed in the correct slots according to your motherboard manual.
Run a memory diagnostic tool (e.g., Windows Memory Diagnostic). Ensure the module is not overheating; check system airflow. Verify the module is running at its rated speed and voltage (XMP/EXPO profiles may need adjustment in BIOS).
Setup: Ensure your system is powered off and unplugged before installation. Locate the RAM slots on your motherboard. Align the notch on the memory module with the corresponding key in the slot. Gently push down on both ends of the module until the clips on the sides snap into place. Refer to your motherboard manual for specific slot population order if installing multiple modules.
Compatibility: This module is a DDR5 UDIMM. It requires a motherboard and CPU that explicitly support DDR5 memory. It is Non-ECC and best suited for desktop PCs. Verify your motherboard's Qualified Vendor List (QVL) for guaranteed compatibility, although it may function with unlisted modules.
Care: Handle memory modules by their edges to avoid touching the gold contacts. Store modules in anti-static packaging when not in use. Keep the computer's internal environment clean to prevent dust buildup on components and slots, which can affect performance and longevity.