Frenchic Wall Paint - Wedgewood Green
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and homeowners looking for a high-quality, versatile, and easy-to-use paint for interior walls and ceilings. The key benefit is its durable, scrubbable, ultra-matte finish that requires minimal preparation due to its self-priming and self-sealing properties. A potential consideration is that while suitable for many surfaces, it's advised to avoid very wet areas like showers.
All features
| Colour | Green |
|---|---|
| Model Part Number | 40315049574487 |
| Brand | Frenchic |
Extended Product Information
FAQs
How many coats of Frenchic Wall Paint are recommended?
While coverage is excellent, two coats are generally recommended for best results, providing optimal depth of colour and a more durable finish.
Is this paint suitable for bathrooms?
Frenchic Wall Paint is suitable for general interior walls and ceilings. However, it is advised to avoid very wet areas like shower surrounds. For bathrooms, consider their specialist ranges if available or ensure excellent ventilation.
How long does it take for the paint to be fully cured?
The paint is touch-dry within 1-2 hours, but it takes approximately 24 hours to be fully dry to the touch and ready for light cleaning. Full curing, achieving maximum durability and scrubbability, takes up to 7 days.
Can I use this paint on wooden furniture?
Yes, this paint is suitable for use on wooden furniture, interior woodwork, and kitchen cupboards. Ensure the surface is clean and prepared appropriately.
What is the coverage rate for a 2.5L tin?
A 2.5L tin will cover up to 35m² with a single coat. For two coats, you can expect coverage of approximately 17.5m².
Is the paint safe for children's rooms?
Yes, the paint is certified safe for use on children's toys (EN71-3) and is water-based with low VOCs and virtually no odour, making it a safe choice for children's environments.
What does 'self-priming' and 'self-sealing' mean?
Self-priming means you don't need to apply a separate primer coat before painting on most surfaces. Self-sealing means the paint acts as its own topcoat, offering protection without needing an additional sealant.
Troubleshooting
Paint is not adhering well or peeling.
Ensure the surface was clean, dry, and free from dust or grease before application. For glossy surfaces, a light sanding or degreasing was likely necessary. Ensure the paint has fully cured before subjecting it to stress.
Uneven colour or brush marks visible.
Ensure the paint was stirred thoroughly. Apply in thin, even coats using a good quality brush or roller. Avoid overworking the paint. Ensure sufficient drying time between coats.
Difficulty cleaning off marks.
Ensure the paint has had at least 7 days to fully cure for maximum scrubbability. Use a soft cloth with mild soap and water. Avoid abrasive cleaners.
Paint seems too thick to apply.
Stir the paint thoroughly. If still very thick, a very small amount of water (no more than 5%) can be added, but this may slightly affect the finish. Ensure the paint has not been stored in extreme temperatures.
Pros and Cons
Pros
- Reduces preparation time with self-priming and self-sealing capabilities.
- Easy to clean and maintain thanks to its scrubbable finish.
- Excellent coverage means fewer coats are needed for a rich colour.
- Low VOC and virtually no odour for a healthier and more pleasant painting experience.
- Award-winning recognition validates its quality and performance.
- Suitable for a wide range of interior surfaces, offering great versatility.
Cons
- Not recommended for very wet areas such as shower surrounds.
- Two coats are recommended for optimal colour depth and durability, increasing application time.
- Requires at least 24 hours for the paint to cure fully before it is considered scrubbable.
- While versatile, specific surface preparation might be needed for optimal adhesion on certain materials (e.g., melamine or gloss surfaces).
Setup, Compatibility & Care
Preparation
- Clean the Surface: Ensure the surface is clean, dry, and free from dust, grease, and any loose material.
- Repair Imperfections: Fill any cracks or holes and sand smooth.
- No Primer Needed: Frenchic Wall Paint is self-priming, so no separate primer is required on most sound surfaces.
Compatibility
- Ideal Surfaces: Interior walls and ceilings.
- Suitable Surfaces: Wooden furniture, interior woodwork, wooden floors, kitchen cupboards, metal, powder-coated radiators, interior uPVC, and ceramic wall tiles.
- Avoid: Very wet areas like shower baths or surrounds. For glossy or melamine surfaces, a light sand or a coat of Frenchic's Sugar, Soap & Shame degreaser is recommended for optimal adhesion.
Application
- Stir Well: Thoroughly stir the paint before and during use.
- Apply First Coat: Apply a thin, even coat using a brush or roller. Allow to dry (typically 1-2 hours).
- Apply Second Coat: For best results and colour depth, apply a second coat. Allow to dry.
- Curing: The paint reaches its full durability and scrubbability after approximately 24 hours, but full curing can take up to 7 days. Avoid aggressive cleaning during this period.
Care and Cleaning
- Regular Cleaning: For light marks, use a soft, damp cloth. Wipe gently.
- Tougher Stains: For more stubborn marks, use a soft cloth or sponge with a mild detergent and water. Wipe the affected area gently.
- Scrubbing: Once fully cured, the paint is completely scrubbable and can withstand ISO11998 Class 1 Wet Scrub rating tests. Avoid abrasive cleaners or tools that could damage the matte finish.
- Maintenance: Touch-ups can be made by applying a thin coat to the affected area after cleaning.