Lieber Matt Black GU10 Fire rated IP65 downlight - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Lieber Matt Black GU10 Fire rated IP65 downlight is designed for homeowners and builders seeking reliable, safe, and energy-efficient lighting solutions. Its key benefit is robust fire protection up to 90 minutes and IP65 rating for wet areas, though it requires a separate GU10 bulb. This downlight offers a seamless blend of safety, efficiency, and modern aesthetics for various residential and commercial applications.
All features
| Colour | Black |
|---|---|
| Model Part Number | RL-LL-10-DLR001-1MB |
| Brand | LIEBER |
Extended Product Information
FAQs
Is the GU10 bulb included with the downlight?
No, the GU10 bulb is not included. You will need to purchase a compatible GU10 bulb separately.
What is the maximum wattage for a GU10 bulb I can use?
The maximum bulb wattage supported is 35W.
Can I use this downlight in a bathroom?
Yes, this downlight is IP65 rated, making it suitable for use in bathrooms, including Zone 1 areas.
How long does the fire rating last?
The downlight is fire rated for 60 and 90 minutes.
What is the cut-out size required for installation?
A standard 72mm cut-out diameter is required for installation.
Can I adjust the ceiling thickness compatibility?
Yes, the springs can be repositioned to accommodate ceilings up to 45mm thick, from the standard 30mm.
Does this downlight come with a warranty?
Yes, the product comes with a 3-year guarantee.
Troubleshooting
Downlight does not turn on.
Check that the power supply is on and correctly connected. Ensure the GU10 bulb is properly seated in the socket. Test the bulb in another fixture if possible.
Flickering light.
Verify the GU10 bulb is compatible with the dimmer switch if used. Try a different bulb to rule out a faulty bulb. Ensure electrical connections are secure.
Downlight is loose in the ceiling.
Check that the installation clips are properly engaged with the ceiling material. Ensure the cut-out size is correct for the downlight.
Reduced brightness or uneven light.
Ensure the correct wattage bulb is installed (max 35W). Check if the bulb is a lower lumen output LED or nearing the end of its lifespan. Clean the bulb and downlight if dusty.
Pros and Cons
Pros
- Provides significant fire protection for up to 90 minutes.
- IP65 rating makes it safe for use in bathrooms and other wet areas.
- Compatible with energy-saving LED GU10 bulbs.
- Simple and quick installation process due to connector clips.
- Allows for adjustable lighting levels with dimmable bulbs.
- Modern matt black finish complements various interior designs.
Cons
- GU10 bulb is not included and must be purchased separately.
- Maximum bulb wattage is limited to 35W.
- Requires a transformer for operation (though not included in the product description, GU10s typically don't need separate transformers unless specified).
- Ceiling thickness limit requires attention during installation planning.
Setup, Compatibility & Care
Setup:
- Ensure the power supply is switched off before installation.
- Cut a 72mm diameter hole in the ceiling.
- If the ceiling is thicker than 30mm, adjust the springs to the 45mm setting.
- Connect a standard GU10 bulb (35W max, not included) to the bulb holder.
- Use the built-in two-connector clips to secure the downlight into the ceiling cut-out.
- Restore power.
Compatibility:
- Bulbs: Compatible with standard GU10 bulbs (LED recommended for efficiency).
- Dimmers: Compatible with dimmable GU10 bulbs for adjustable lighting.
- Ceiling Thickness: Suitable for ceilings up to 30mm thick, extendable to 45mm with spring adjustment.
- Voltage: Operates on a 220-240V power supply.
Care:
- Always disconnect power before cleaning.
- Wipe the exterior with a soft, dry or slightly damp cloth.
- Avoid using abrasive cleaners or solvents.
- Ensure ventilation around the fitting is not obstructed.