Loctite Rear View Mirror Bonder - 0.5ml (4 Pack)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Loctite Rear View Mirror Bonder 0.5ml (4 Pack) is designed for car owners and automotive professionals needing a fast and strong adhesive for securely fixing car mirrors and performing reliable auto glass-to-metal repairs. Its key benefit is instant, strong adhesion without the need for clamps or long curing times, allowing for quick, durable repairs. A potential caveat is the small 0.5ml tube size, which is ideal for single repairs but may require multiple tubes for extensive work. This product offers a high-performance adhesive specifically formulated for automotive applications, bonding glass to metal instantly.
All features
| Brand | Loctite |
|---|
Extended Product Information
FAQs
How long does it take for the adhesive to cure completely?
While the bond is instant and strong upon application, full strength curing typically occurs within 1 to 24 hours, depending on environmental conditions like temperature and humidity. However, the mirror can usually be used much sooner.
Can this be used for anything other than rear view mirrors?
Yes, it is suitable for any automotive glass-to-metal bonding application where a strong, instant bond is required, such as reattaching small metal trim pieces to glass.
What is the shelf life of the Loctite Rear View Mirror Bonder?
Unopened tubes stored correctly in a cool, dry place typically have a shelf life of at least two years. Once opened, it is best to use the tube promptly.
Do I need any special tools to apply this?
No, the 0.5ml tubes are designed for direct application. You will need a clean cloth to prepare the surfaces.
Is the adhesive clear once dried?
Yes, the adhesive dries clear, ensuring a clean and unobtrusive repair.
Can I use this on a plastic mirror housing?
This product is specifically designed for glass-to-metal bonding. It is not recommended for bonding plastic components.
Troubleshooting
Adhesive does not seem to be bonding strongly.
Ensure both surfaces were thoroughly cleaned and dried before application. Reapply, ensuring firm pressure is held for at least 30 seconds. Check for and remove any oil or contaminants from the surfaces.
Tube seems empty or difficult to dispense.
Ensure the cap is fully twisted off. Try gently squeezing the tube. If the product is old or has been exposed to air, it may have cured inside the tube.
Mirror is still loose after application.
The bond may not have fully cured or the surfaces may not have been properly prepared. Allow more time for curing and ensure the mirror is not subjected to stress during this period. Clean surfaces again and reapply if necessary.
Pros and Cons
Pros
- Provides an instant and strong bond for rear view mirrors.
- Specifically formulated for automotive glass-to-metal applications.
- Fast-setting adhesive minimizes repair time.
- Durable formula withstands vibration and temperature changes.
- Convenient 4-pack allows for multiple uses.
Cons
- 0.5ml tubes are small and may be insufficient for larger repairs.
- Requires clean, dry surfaces for optimal adhesion.
- Not suitable for plastic-to-metal or other material bonding.
- Curing time may vary slightly based on environmental conditions.
- Requires careful application to avoid excess material.
Setup, Compatibility & Care
Setup:
- Ensure both the glass surface (mirror base) and the metal surface (windshield mount) are clean, dry, and free from dust, grease, or old adhesive.
- Carefully twist off the cap of the 0.5ml tube.
- Apply a small, even bead of the adhesive to one of the surfaces (typically the metal bracket).
- Immediately press the two surfaces together firmly.
Compatibility:
- Bonds automotive glass to metal.
- Ideal for rear view mirror brackets and other similar automotive applications.
- Not recommended for use on plastics, painted surfaces, or other materials.
Care:
- Store the unused tubes in a cool, dry place away from direct sunlight.
- Keep tubes sealed when not in use to preserve adhesive quality.
- Clean any accidental drips immediately with a damp cloth before the adhesive cures.