Bahco SB7800SM Series Hexagon Metric Socket - 19mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Bahco SB7800SM Series Hexagon Metric Socket (19mm) is designed for professionals and DIY enthusiasts needing a durable and efficient hand tool for fastening tasks. Its key benefit lies in its dynamic drive profile, offering superior grip and higher efficiency. A primary caveat is that it is not intended for machine operation. This guide covers its features, usage, and maintenance.
All features
| Model Part Number | SB7800SM |
|---|---|
| Brand | Bahco |
Extended Product Information
FAQs
What is the main advantage of the 'dynamic drive profile'?
The dynamic drive profile is designed to grip the fastener more securely and distribute force over a larger surface area, which helps to prevent slippage and reduces the risk of rounding off bolt heads or nuts.
Can I use this socket with an impact wrench?
No, this socket is specifically designed for hand-operated tools only. It is not rated for use with impact wrenches or other powered driving tools, as this can cause damage and pose a safety risk.
What material is the Bahco SB7800SM socket made from?
It is manufactured from high-performance alloy steel, known for its strength and durability.
How do I clean and maintain the socket?
Wipe it clean with a cloth after use. A mild degreaser can be used for tougher grime, but ensure the socket is dried thoroughly afterward. Store in a dry place.
What is the drive size of this socket?
This socket features a 1/2-inch square drive, making it compatible with most standard 1/2-inch drive ratchets and accessories.
Is this socket suitable for rusted or damaged fasteners?
The dynamic drive profile can offer better grip on fasteners with slightly rounded edges than a standard socket, but it is not a substitute for proper fastener removal tools for severely damaged bolts.
What is the specific metric size of this socket?
This particular socket is for 19mm metric fasteners.
Troubleshooting
Socket slips on fastener
Ensure the socket is fully seated onto the fastener head. Check for any debris or damage on both the socket and the fastener. Verify you are using the correct size socket.
Difficulty attaching socket to driver
Check that the square drive of your tool is clean and free of obstructions. Ensure the socket's drive opening is clear. Confirm you are using a 1/2-inch drive tool.
Socket appears to be widening or deforming
Cease use immediately. This may indicate the socket is being used with excessive force or with an incompatible tool (e.g., an impact wrench). Inspect for damage and replace if necessary.
Pros and Cons
Pros
- Durable construction from high-performance alloy steel.
- Dynamic drive profile enhances grip and efficiency.
- Precise 19mm metric fit.
- Polished finish for easy maintenance and appearance.
- Suitable for hand-operated torque control.
Cons
- Not designed for use with power tools or impact wrenches.
- Single size (19mm) may require purchasing additional sockets for a full set.
- Can be heavier than some lighter-duty sockets.
Setup, Compatibility & Care
Setup:
No specific setup is required. Simply attach the Bahco SB7800SM 19mm socket to a compatible 1/2-inch square drive tool (ratchet, breaker bar, torque wrench).
Compatibility:
- Drive Size: Designed for 1/2-inch square drive tools.
- Fastener Size: Optimized for 19mm metric fasteners.
- Not Compatible: Impact wrenches, air tools, or any powered driving tools.
Care:
- Cleaning: After use, wipe the socket clean with a dry or slightly damp cloth to remove dirt and grease. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
- Storage: Store in a dry environment, ideally in a socket organizer or toolbox, to prevent corrosion and protect the finish.
- Inspection: Periodically inspect the socket for any signs of wear, cracks, or damage, especially around the drive opening and the driving profile.