Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for owners of the Whirlpool WIC 3C26 N UK Built-In Dishwasher, offering a comprehensive overview of its features and usage. Enjoy the convenience of sparkling clean dishes with its 14-place setting capacity and 6th Sense Technology. Please note that while the NaturalDry system enhances drying, optimal results depend on proper loading and detergent selection.
| Energy Efficiency | E |
|---|---|
| Model Part Number | WIC3C26NUK |
| Brand | Whirlpool |
Open the salt reservoir (usually located at the bottom of the dishwasher). Fill it with water before adding the salt. Use only dishwasher salt, and follow the instructions on the salt container.
It is recommended to clean the filters after each cycle or at least once a month, depending on usage.
You can use dishwasher tablets, powder, or liquid detergent. Always follow the detergent manufacturer's instructions.
6th Sense technology automatically senses the level of soiling and adjusts the water, temperature, and time to provide optimal cleaning performance while saving water and energy.
The NaturalDry system automatically opens the dishwasher door at the end of the drying cycle to allow air to circulate and improve drying results.
Select the program, then press the delay start button to set the desired start time (up to 12 hours). The dishwasher will start automatically at the set time.
Multizone washing allows you to select either the upper or lower basket for washing, which is helpful for smaller loads or when you only need to wash a few items.
This dishwasher comes with a 2-year warranty from the manufacturer, covering defects in materials and workmanship.
Check the power supply and ensure the door is closed properly. Check that the water supply is turned on.
Ensure the rinse aid dispenser is filled. Check the door seal for any damage. Make sure you are not overloading the dishwasher and using the correct program.
Check and clean the filters. Ensure the spray arms are not blocked. Make sure the detergent is suitable and not expired. Consider using a higher temperature program for tougher stains.
Check the drain hose for blockages. Clean the filter and the drain pump. Check the sink drain connection if there is an air gap.
