WORKPRO 1/2" Drive Impact Lug Nut Socket - 17mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The WORKPRO 17mm Impact Socket is an essential tool for automotive technicians and DIYers looking to safely remove and install 17mm lug nuts without damaging their vehicle's wheels. Constructed from high-strength CR-MO steel, it offers exceptional durability, though its specialized design is strictly intended for 17mm hardware, limiting its versatility for other bolt sizes.
All features
| Model Part Number | W074582 |
|---|---|
| Brand | WORKPRO |
Extended Product Information
FAQs
Can I use this with a standard hand-held ratchet?
Yes, it is compatible with any 1/2-inch drive manual ratchet or torque wrench.
Will the plastic insert fit all 17mm lug nuts?
It is designed to fit standard 17mm hex lug nuts. Extremely oversized aftermarket lug covers may cause a tight fit.
Is the protective sleeve replaceable?
The sleeves are integrated into the design. If the sleeve is damaged, it is recommended to replace the unit for continued protection of your wheels.
Can I use this on non-lug nut bolts?
Yes, it will function as a standard 17mm 6-point impact socket, though the protective sleeve is specifically intended for wheel applications.
Is the socket rust-proof?
It features a rust-resistant blue electrophoretic coating, but it should still be wiped dry after exposure to moisture to maximize its lifespan.
Troubleshooting
Socket feels loose on the lug nut
Ensure the lug nut is clean and not caked in excessive road grime. Verify you are using a 17mm socket on a 17mm lug nut.
Socket won't slide onto the anvil
Check if the rubber ring inside the drive end is pinched or misaligned. Clear any debris from the square drive of your wrench.
Protective sleeve is spinning freely
The outer sleeve is designed to spin independently to protect the wheel finish. This is normal functionality and not a defect.
Pros and Cons
Pros
- Protective sleeves prevent cosmetic damage to expensive wheels
- Durable CR-MO construction withstands heavy impact use
- Long 86mm reach works well with deep-dish wheels
- Clear laser-etched sizing for quick identification
Cons
- Specific to 17mm lug nuts only
- Plastic protective sleeves can wear out over long-term heavy use
- May be too long for very tight storage cases
Setup, Compatibility & Care
Setup: The socket is ready for immediate use out of the package. It connects to any standard 1/2-inch drive impact wrench. If using a tool with a detent pin, align the socket's groove to allow the pin to snap into place for a secure connection.
Compatibility: Compatible with all 1/2-inch drive impact wrenches and manual torque wrenches. It is specifically sized for 17mm lug nuts found on many European and Asian vehicle models.
Care:
- Wipe the socket clean with a dry cloth after each use to remove oil and metal dust.
- Periodically inspect the internal plastic insert for cracks or debris.
- Store in a moisture-free tool box to maintain the integrity of the electrophoretic coating.
- Do not use abrasive cleaners on the protective outer sleeve, as this can degrade the finish.