Kitchen Kit Slab Sink and Hob Cabinet - 600mm - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Kitchen Kit Slab Sink and Hob Cabinet is designed for DIY enthusiasts and professionals seeking a rapid, durable kitchen installation solution. Its standout benefit is a glue-and-click assembly system that enables the carcass to be built in as little as 30 seconds, saving significant time during kitchen renovations. While the unit offers exceptional convenience and robust materials, users should note that as a flat-pack product, it requires careful organization of components during the initial setup phase to ensure all hardware is accounted for before assembly begins.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FKKF0235 |
| Brand | Kitchen Kit |
Extended Product Information
FAQs
Can I use this cabinet for a ceramic hob?
Yes, the unit is robust enough to support standard hobs, provided the worktop is supported according to the appliance manufacturer's instructions.
Does the unit come with the sink or hob included?
No, this is a carcass and door housing unit. You must purchase the sink and hob separately to match your specific requirements.
Is the door pre-drilled for hinges?
The doors are manufactured to accommodate the supplied soft-close hinges, making installation simple and precise.
Can I swap the door for a different style later?
Yes, as long as you source a 600mm door with the same hinge drilling pattern, you can update the front panel in the future.
What tools are needed for assembly?
While the glue-and-click system requires no screws for the carcass, you will need a screwdriver to attach the hinges and secure the cabinet to the wall.
Troubleshooting
Door is not hanging straight or soft-close is uneven
Use the adjustment screws on the hinge plate to shift the door vertically, horizontally, or in-and-out until it aligns perfectly with the cabinet frame.
Cabinet feels unstable after assembly
Ensure all four adjustable legs are firmly in contact with the floor and tightened. Use a spirit level to confirm the unit is level in both directions.
Pros and Cons
Pros
- Extremely fast 30-second assembly time
- Sturdy 18mm board thickness for both carcass and doors
- Soft-close hinges included for a high-end feel
- Versatile design allows for left or right-hand door hinging
- Built-in rear service gap for easy plumbing access
Cons
- Requires manual assembly as it arrives flat-packed
- Limited to 600mm width configurations
- Glue-and-click system is permanent once set
- Handles and worktop not included
Setup, Compatibility & Care
To begin assembly, ensure you have a clean, flat surface. The glue-and-click system relies on a secure bond, so ensure all joints are pressed firmly until the mechanism engages. Once assembled, adjust the legs using a spirit level to ensure the unit is perfectly horizontal before installing your worktop.
- Compatibility: Designed as a standard 600mm unit, it integrates seamlessly with other Kitchen Kit Slab range products. Always verify your hob cutout dimensions before installation to ensure sufficient clearance from the top rail.
- Care: Clean the MDF doors using a damp, non-abrasive cloth. Avoid using harsh chemical solvents or scouring pads, as these can compromise the PUR adhesive banding. Wipe away any standing water near the sink area immediately to maintain the life of the unit.