Stormgrip Adhesive for Hygiene Cladding - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Stormgrip adhesive is a high-performance 2-part polyurethane solution designed for professional installers and contractors who need a reliable, water-resistant bond for hygiene cladding systems like Stormclad. It excels at creating durable, moisture-resistant seals across various construction surfaces, though users should note that as a 2-part system, it requires careful mixing and immediate application due to its chemical curing process.
All features
| Colour | White |
|---|---|
| Model Part Number | A1596 |
| Brand | Storm |
Extended Product Information
FAQs
How much area does one 6.5kg tub cover?
A single 6.5kg tub of Stormgrip will cover approximately 5 to 6 square metres, depending on the substrate and application method.
Can this adhesive be used in damp areas?
Yes, Stormgrip is water-resistant and is specifically formulated for use in hygiene cladding projects where moisture protection is essential.
Is this a single-part or two-part adhesive?
It is a 2-part polyurethane adhesive, meaning the two components must be mixed together before use to initiate the curing process.
What is the primary use for this product?
It is primarily used for bonding hygiene cladding sheets, such as Stormclad, to various construction surfaces.
Does this adhesive fill gaps?
Yes, the product is capable of filling gaps and bridging minor irregularities on the wall surface.
Troubleshooting
Adhesive not hardening
Ensure both parts were mixed in the correct ratio and stirred until the color was perfectly uniform.
Difficulty spreading the adhesive
Use a fresh notched trowel and ensure the ambient temperature is within the recommended range for application.
Uneven bond surface
Apply more pressure to the cladding sheet during installation or use temporary supports to hold the sheets in place while curing.
Pros and Cons
Pros
- Extremely strong and durable chemical bond
- Excellent water resistance for hygiene-critical areas
- Effective at bridging gaps on uneven substrates
- Specifically optimized for Stormclad and similar systems
Cons
- Requires manual mixing of the two components
- Limited working time once the parts are combined
- Not suitable for small touch-up jobs due to tub size
- Requires professional application techniques for best results
Setup, Compatibility & Care
Before starting your installation, verify that your wall surface is structurally sound and free of dust, grease, or loose debris. Compatibility is highest with rigid hygiene cladding panels; always perform a test bond if applying to unusual or non-porous substrates. After mixing, use the product immediately, as the polyurethane base begins to cure as part of its chemical reaction. For long-term care, ensure that the edges of the cladding are properly sealed with a compatible sealant to prevent water ingress behind the sheets, maintaining the integrity of the Stormgrip bond.