Tetrion Stonefil Clear 900ml - TETTSF015
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to repair or restore stone, ceramic, and masonry surfaces using Tetrion Stonefil. The key benefit is its versatility as a filler and adhesive, providing a smooth, waterproof finish. Keep in mind that for optimal results, the product should be applied in temperatures between 5°C and 30°C.
All features
| Model Part Number | TETTSF015 |
|---|---|
| Brand | Tetrion |
Extended Product Information
FAQs
What surfaces can Tetrion Stonefil be used on?
It can be used on natural stone, ceramics, marble, slate, concrete, and brickwork.
Is Tetrion Stonefil waterproof?
Yes, it provides a waterproof finish.
How long does it take for Tetrion Stonefil to set?
The setting time depends on the specific conditions. Always refer to the product instructions for the correct information.
Can I paint over Tetrion Stonefil?
Yes, once set, it can be overpainted.
How do I clean the tools after use?
Clean tools with cellulose thinners before the paste sets.
What is the temperature range for use?
For best results, use in temperatures between 5°C and 30°C.
Troubleshooting
Filler not setting properly.
Ensure the correct ratio of Stonefil to hardener is used. Check the temperature; it should be between 5°C and 30°C.
Difficult to apply smoothly.
Use a suitable spatula or filling knife. For a smoother finish, lightly dampen the tool with cellulose thinners before application.
Pros and Cons
Pros
- Wide range of compatible materials.
- Provides a durable and waterproof finish.
- Quick setting time speeds up the repair process.
- Can be used for both filling and adhesive purposes.
Cons
- Requires cellulose thinners for tool cleanup before the paste sets.
- Application is best within a specific temperature range (5°C to 30°C).
Setup, Compatibility & Care
- Preparation: Ensure the surface is clean, dry, and free of loose debris.
- Mixing: Mix Tetrion Stonefil with the hardener according to the manufacturer's instructions.
- Application: Apply the mixture to the damaged area, filling cracks or bonding components.
- Finishing: Once set, sand the surface smooth if necessary. The filler can be overpainted.
- Compatibility: Tetrion Stonefil is compatible with various materials, including marble, granite, concrete, and brick. Ensure proper surface preparation for optimal adhesion.
- Care: To maintain the finish, clean with a mild detergent and avoid abrasive cleaners. Tools should be cleaned with cellulose thinners before the paste sets.