Schneider Electric Acti 9 Comb Rail - A9XPH124
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Schneider Electric A9XPH124 is a professional-grade single-phase comb busbar designed for electricians and panel builders who require a reliable and efficient method for power distribution across multiple circuit protection devices. It offers the key benefit of streamlined, safe connectivity with 24 modules and an 18mm pitch, though it is specifically engineered for professional electrical systems and requires careful cutting and installation to meet safety standards.
All features
| Model Part Number | A9XPH124 |
|---|---|
| Brand | Schneider Electric |
Extended Product Information
FAQs
Can I use the A9XPH124 with other brands of circuit breakers?
This busbar is specifically designed for the Schneider Electric Acti 9 range and is not guaranteed to be compatible with other manufacturers' devices.
How do I calculate the current limit?
The busbar is rated for up to 100A; ensure your main incoming feed does not exceed this rating.
What should I do if I cut the busbar too short?
Unfortunately, a cut busbar cannot be lengthened. Always measure twice before cutting.
Are end caps required after cutting?
Yes, it is highly recommended to use appropriate insulation end caps to cover the exposed copper at the cut end for safety.
What is the pitch of this busbar?
The A9XPH124 features an 18mm pitch, which matches standard miniature circuit breaker spacing.
Troubleshooting
Busbar does not align with terminal clamps
Ensure the device modules are mounted correctly on the DIN rail and that you are using compatible iC60, iK60, iID, or iSW series components.
Difficulty in seating the busbar teeth
Check for any plastic debris or misalignment and verify that the terminal screws of the circuit breakers are fully backed out before insertion.
Pros and Cons
Pros
- High current capacity of 100A
- Easy to cut to specific length requirements
- Broad compatibility with Schneider Acti 9 product lines
- Promotes clean, organized panel wiring
- Green Premium certified for sustainability
Cons
- Requires professional installation knowledge
- Designed primarily for specific Schneider Electric device series
- Requires proper end caps if cut to size
Setup, Compatibility & Care
Before installation, ensure the main power is isolated. When preparing the busbar, measure the required length based on your specific bank of circuit breakers and use an appropriate saw to cut the rail. Always file the edges to remove burrs.
Compatibility Checklist:
- Compatible Series: iC60, iK60, iID, iSW.
- Voltage Rating: Up to 415V.
- Current Rating: Up to 100A.
Care Instructions: Keep the busbar free of dust and debris before insertion. Ensure all terminal screws on the connected devices are tightened to the torque specifications provided by the device manufacturer to prevent resistance and heat buildup.