UniBond No More Nails Grab Adhesive Tube - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to eliminate nails and screws in their DIY projects or repairs. UniBond No More Nails Grab Adhesive provides a strong, reliable bond for various materials. Keep in mind that for optimal results, one surface must be porous to allow for drying via water evaporation.
All features
| Colour | White |
|---|---|
| Brand | Unibond |
Extended Product Information
FAQs
What materials can I use this adhesive on?
UniBond No More Nails is suitable for wood, ceramic, metal, concrete, brick, plaster, stone, and most plastics.
Do I need a cartridge gun?
No, the tube is designed for easy application without the need for a cartridge gun.
How long does it take for the adhesive to dry?
Allow 24-48 hours for the adhesive to fully dry and cure.
Can I use this adhesive outdoors?
No, this product is specifically designed for interior use only.
How do I clean up the adhesive?
Clean excess adhesive and residues with water immediately after application.
What should I do if the bond isn't strong enough?
Make sure surfaces are clean, allow the full drying time, and consider adding support for heavier items while drying.
Is one surface required to be porous?
Yes, one of the surfaces must be porous as the product dries by water evaporation.
Can I paint over the adhesive?
Yes, once the adhesive is fully dry, it can be painted over.
Troubleshooting
Bond not holding
Ensure both surfaces are clean and free from dust, grease, and loose material. Allow the full 24-48 hour drying time.
Adhesive is not extruding
Ensure the cap is removed and the tube is not blocked. If using a cartridge gun, make sure it is functioning correctly.
Excess adhesive
Wipe away excess adhesive with a damp cloth or sponge immediately after pressing the items together.
Pros and Cons
Pros
- Strong bonding capabilities
- Easy to apply
- Versatile use on different materials
- Eliminates the need for nails and screws
Cons
- Drying time of 24-48 hours
- Requires one porous surface for proper drying
- May require additional support for very heavy or distorted items during drying
- Not suitable for exterior use
Setup, Compatibility & Care
Setup
- Ensure surfaces are clean and free from dust, oil, grease, and loose material.
- Remove the cap from the tube.
- Squeeze the tube to extrude the adhesive. A cartridge gun is not needed.
- Apply the adhesive in continuous beads (15cm apart) to one surface.
- Press the items together with a twisting action.
Compatibility
UniBond No More Nails Grab Adhesive is compatible with:
- Wood
- Ceramic
- Metal
- Concrete
- Brick
- Plaster
- Stone
- Most plastics
Care
- Clean excess adhesive and residues with water immediately after application.
- Store the tube in a cool, dry place when not in use.
- Avoid direct sunlight and extreme temperatures.