Neilsen Oxygen Sensor Socket - 22mm x 150mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Neilsen Oxygen Sensor Socket, specifically designed for removing and installing deep-seated Lambda Oxygen Sensors. The key benefit is its ability to access sensors that are difficult to reach, thanks to its design. Note that this socket is specifically for 22mm sensors and may not fit all vehicle models.
All features
| Model Part Number | CT3160 |
|---|---|
| Brand | Neilsen |
Extended Product Information
FAQs
What size oxygen sensors does this socket fit?
This socket is specifically designed for 22mm oxygen sensors.
What type of drive does this socket require?
It requires a 1/2" drive.
Is this socket suitable for all vehicles?
No, it is essential to verify the sensor size and accessibility in your specific vehicle model.
What is the socket made of?
The socket is made of durable Cro-Mo steel.
How long is the socket?
The socket is 150mm in length.
What is the purpose of the slot in the socket?
The slot allows the oxygen sensor wiring to pass through, making it easier to access and remove the sensor.
How should I clean the socket?
Clean the socket after each use to remove any dirt or debris and store it in a dry place.
What should I do if the socket is difficult to turn?
Apply penetrating oil to the sensor threads and allow it to sit for some time. Ensure the socket is fully engaged, and apply steady force.
Troubleshooting
Socket doesn't fit the sensor.
Verify that the sensor is 22mm. If it is not, a different socket size will be required.
Socket slips or rounds off the sensor.
Ensure the socket is fully engaged with the sensor. Use penetrating oil if the sensor is corroded. If needed, try a different socket design.
Difficulty accessing the sensor.
Check if there are obstructions that you can remove to improve access. Consider using extensions to reach the sensor more easily.
Pros and Cons
Pros
- Allows easy removal and installation of hard-to-reach oxygen sensors.
- The slot cut in the socket accommodates wiring, preventing damage.
- Made from durable Cro-Mo steel, ensuring long-lasting performance.
- The 150mm length provides the necessary reach for various vehicle applications.
- The 6-point socket design provides a secure grip, reducing the risk of rounding off the sensor.
Cons
- Only compatible with 22mm oxygen sensors.
- May not fit all vehicle models due to variations in sensor placement and access.
- Requires a 1/2" drive ratchet or extension, which may not be included.
- The length might be excessive in some applications.
- The user needs to have some mechanical experience to use the tool correctly.
Setup, Compatibility & Care
Setup:
- Attach the socket to a 1/2" drive ratchet or extension.
- Position the socket over the oxygen sensor, ensuring the wiring passes through the slot.
- Apply force to loosen or tighten the sensor.
Compatibility:
- Designed for 22mm Lambda Oxygen Sensors.
- Compatible with most vehicles but always verify sensor size and accessibility.
Care:
- Clean the socket after each use to remove any dirt or debris.
- Store the socket in a dry place to prevent rust.
- Avoid using excessive force, which could damage the sensor or the socket.