Big Boy Easy Sanding Ultra Fine Body Filler - Silverhook - BIG12
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Silverhook's Big Boy Easy Sanding Ultra Fine Body Filler (BIG12) to repair scratches and uneven surfaces on various materials. The key benefit is its excellent sanding properties, preventing sandpaper clogging and ensuring a smooth finish. However, be aware that while it adheres well to many surfaces, proper surface preparation is essential for optimal results.
All features
| Model Part Number | BIG12 |
|---|---|
| Brand | Silverhook |
Extended Product Information
FAQs
What surfaces can I use this filler on?
This filler is suitable for use on metal, bridging fillers, and some PVCs. Always test on an inconspicuous area for compatibility.
How long does it take for the filler to cure?
Curing time varies depending on temperature and humidity. Refer to the product instructions for specific details.
How should I prepare the surface before applying the filler?
Clean the surface thoroughly, removing rust, loose paint, and contaminants. Degrease the surface and ensure it's dry before application.
What type of sandpaper should I use?
Start with a coarser grit sandpaper (e.g., 80-grit) for initial shaping and move to finer grits (e.g., 180, 220, or even finer) for smoothing.
Can I use this filler on plastic?
It may be compatible with some PVCs, but always test on an inconspicuous area first.
How should I store the filler?
Store in a cool, dry place. Ensure the container is tightly sealed after use.
What happens if I don't mix the hardener properly?
The filler may not cure correctly, leading to poor performance and adhesion issues.
Troubleshooting
Filler is not hardening.
Ensure the correct ratio of hardener to filler is used. Check the expiration date. Ensure proper mixing and that the temperature is within the recommended range.
Filler is difficult to sand.
Ensure that the filler is fully cured before sanding. Use the appropriate grit sandpaper; start with a coarser grit and work your way up to a finer grit.
Filler is cracking after application.
Apply the filler in thin layers. Ensure proper surface preparation. Avoid applying too thick a layer at once. Make sure to use the correct hardener.
Filler doesn't adhere to the surface.
Ensure the surface is thoroughly cleaned and degreased. Lightly sand the surface to provide a better grip. Ensure the product is suitable for the material.
Pros and Cons
Pros
- Easy to sand, saving time and effort.
- Prevents sandpaper clogging.
- Corrosion-resistant properties for exterior use.
- Adheres well to various surfaces, including metal and bridging fillers.
- Talc-free formula improves sanding experience.
Cons
- Requires mixing of two components before use.
- Proper surface preparation is crucial for optimal adhesion.
- May require multiple applications for deep imperfections.
- Curing time needs to be considered before sanding.
- Not suitable for all types of plastics.
Setup, Compatibility & Care
- Preparation: Clean the surface thoroughly. Remove any rust, loose paint, or contaminants. Use a suitable degreaser for best results. Ensure the surface is dry before application.
- Mixing: Mix the two components of the filler according to the manufacturer's instructions. Ensure a homogenous mixture is achieved.
- Application: Apply the mixed filler to the damaged area using a spreader or applicator. Apply in thin layers for better results.
- Curing: Allow the filler to cure completely. The curing time will depend on the ambient temperature and humidity. Refer to the product instructions.
- Sanding: Once cured, sand the filler using appropriate grit sandpaper. Start with a coarser grit and gradually move to finer grits until the surface is smooth.
- Compatibility: This filler is compatible with metal, bridging fillers, and some PVCs. Not all plastics are suitable for use, so always test in an inconspicuous area.
- Care: Store the product in a cool, dry place. Ensure the container is tightly sealed after use to prevent drying.