WAGO Terminal Block - 2000-2201
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This WAGO 2000 Series DIN Rail Terminal Block is designed for electricians and automation technicians seeking efficient and reliable electrical connections. Its key benefit is the push-in CAGE CLAMP® technology, which significantly speeds up installation compared to traditional screw terminals. A minor consideration is that it requires a closing plate for complete assembly. This terminal block offers a robust solution for connecting wires up to 1mm² with a current rating of 13.5A and voltage rating of 500V, featuring two levels and four connection points suitable for standard 35mm DIN rail mounting.
All features
| Model Part Number | 2000-2201 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
What type of conductors can be used with this terminal block?
This terminal block is designed for solid conductors with a nominal cross-section of 1mm². It may also be compatible with finely stranded conductors, but always refer to specific application requirements and WAGO guidelines.
Do I need a special tool to install wires?
No, the push-in CAGE CLAMP® technology allows for tool-free insertion of conductors. Simply push the stripped wire into the port.
What is the purpose of the closing plate?
The closing plate is essential for completing the terminal block assembly. It provides insulation for the exposed connection points at the end of the block, ensuring electrical safety.
Can this terminal block be used in high-temperature environments?
Yes, the terminal block has a wide operating temperature range of -25°C to 105°C, making it suitable for many industrial applications.
What is the maximum current and voltage rating?
The rated current is 13.5A and the rated voltage is 500V.
How do I remove a conductor from the terminal block?
To remove a conductor, you typically need a suitable tool (like a flathead screwdriver or a WAGO removal tool) to press the orange lever or push the conductor back while pulling it out. Refer to specific WAGO instructions for the exact procedure for this series.
What does the V0 flammability rating signify?
A V0 flammability rating means the material self-extinguishes within 10 seconds when exposed to a flame, and no flaming drips are produced. This indicates a high level of fire safety.
Troubleshooting
Conductor not making a secure connection
Ensure the conductor is stripped to the correct length and is solid. If using stranded wire, ensure it is properly terminated or use a ferrule if required by the application's specific standards. Verify no insulation is obstructing the clamp.
Terminal block feels loose on the DIN rail
Check that the DIN rail itself is securely fastened. Ensure the terminal block's mounting features are properly engaged with the rail's profile. Confirm the correct DIN rail type is being used.
Overheating during operation
Verify that the connected conductor's cross-section is appropriate for the current. Ensure the current does not exceed the terminal block's rating (13.5A). Check for loose connections or excessive resistance.
Closing plate not fitting
Confirm that the correct WAGO closing plate for the 2000 Series is being used and that the terminal block assembly is correctly aligned before attempting to attach the plate.
Pros and Cons
Pros
- Significantly reduces wiring time due to tool-free push-in connections.
- The two-level design optimizes space within control panels.
- Robust construction ensures durability and safety in demanding environments.
- Versatile for a range of electrical applications up to 13.5A.
- Easy to install on standard 35mm DIN rails.
Cons
- Requires a separate closing plate for completion of the terminal block assembly.
- Limited to 1mm² nominal cross-section, may not be suitable for larger gauge wires.
- The grey color might not fit all aesthetic requirements in some installations.
- Not ideal for applications requiring higher current or voltage ratings beyond 13.5A/500V.
Setup, Compatibility & Care
Setup:
- Ensure the 35mm DIN rail is properly mounted and accessible.
- Strip the conductor end to the appropriate length (refer to WAGO specifications for exact stripping length for 1mm² wire).
- Simply push the stripped conductor end directly into the orange push-in port until it is seated firmly.
- For multi-level applications, mount the terminal blocks sequentially on the DIN rail.
- A closing plate (sold separately) must be fitted to the end of the terminal block assembly to ensure safe operation and complete insulation.
Compatibility:
- Compatible with standard 35mm DIN rail (EN 60715).
- Suitable for solid and stranded conductors with a nominal cross-section of 1mm².
- Designed for use within its rated voltage (500V) and current (13.5A) limits.
Care:
- This terminal block is maintenance-free under normal operating conditions.
- If cleaning is required, use a dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
- Periodically inspect connections for any signs of damage or contamination, especially in harsh environments.