SmallRig Top Handle with Cold Shoe Lite - 3764
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SmallRig Top Handle with Cold Shoe (Lite) 3764 is designed for filmmakers and content creators looking to improve camera handling and expand accessory mounting options, especially for low-angle shots. Its lightweight, ergonomic design offers a comfortable grip and supports up to 5kg, while its multiple cold shoe mounts and threaded holes allow for simultaneous attachment of accessories like microphones and lights. A potential consideration is its primary focus on lightweight setups, which might not suit extremely heavy camera configurations.
All features
| Brand | SmallRig |
|---|
Extended Product Information
FAQs
What is the maximum weight this handle can support?
The SmallRig 3764 Top Handle with Cold Shoe (Lite) supports a maximum weight capacity of 5 kg.
How many accessories can I mount at once?
The handle features 3 front cold shoe mounts and 2 rear cold shoe mounts, along with ARRI 3/8"-16 and 1/4"-20 threaded holes, allowing for multiple accessory attachments simultaneously.
What materials is the handle made of?
The handle is constructed from a combination of Aluminium, Silicone, and Stainless steel.
Is this handle suitable for heavy cinema cameras?
With a 5kg weight capacity, it is suitable for many camera setups, but extremely heavy cinema cameras with large lenses might exceed its limit. It is best suited for DSLRs, mirrorless cameras, and lighter cinema camera configurations.
How do I attach accessories that use a 3/8"-16 thread?
You can use the dedicated ARRI 3/8"-16 locating holes to attach compatible accessories like the SmallRig Monitor Mount 2903 or 2348. For other 3/8"-16 threaded accessories, a suitable adapter or magic arm may be required.
Does the handle come with any mounting screws?
The handle is designed to be mounted onto existing threaded holes on a camera or cage. It typically comes with an Allen wrench for tightening, but relies on the camera or cage's integrated mounting points.
How much does the handle weigh?
The handle itself weighs approximately 129g.
Troubleshooting
Handle feels loose on camera/cage
Ensure the 1/4"-20 or 3/8"-16 mounting screw is fully tightened using the provided Allen wrench. Check that the camera or cage's mounting point is clean and free of debris.
Accessory won't attach securely to cold shoe
Verify that the accessory has a standard cold shoe foot. Ensure the accessory's locking pin (if present) is properly aligned and that the shoe mount on the handle is clean. Do not force attachments.
Creaking noise during use
Check all connection points for tightness. Ensure no dirt or debris is between the handle and the camera/cage or between mounted accessories.
Silicone grip feels sticky
Clean the silicone grip with a slightly damp cloth and allow it to air dry completely. Avoid exposure to solvents or high temperatures.
Pros and Cons
Pros
- Significantly reduces arm fatigue during filming.
- Offers extensive options for mounting multiple accessories simultaneously.
- Lightweight construction (129g) makes it highly portable.
- Ergonomic design ensures a comfortable and secure grip.
- Quick and easy to attach and detach from camera rigs.
Cons
- Maximum load capacity of 5kg may be insufficient for very heavy professional camera setups.
- Cold shoe mounts are best suited for lighter accessories.
- Primarily designed for smaller to mid-sized camera rigs.
Setup, Compatibility & Care
Setup: The SmallRig 3764 mounts directly onto your camera or camera cage using the integrated 1/4"-20 or 3/8"-16 threaded screws. Ensure the handle is securely tightened using the included Allen wrench to prevent any movement during use. Accessories like microphones, lights, or monitors can be attached to the cold shoe mounts or via the threaded holes using compatible arms or adapters.
Compatibility: This handle is compatible with most camera cages and camera bodies featuring standard 1/4"-20 or 3/8"-16 mounting points. The cold shoe mounts are standard and will fit most camera accessories designed for them. The ARRI 3/8"-16 locating holes are specifically for accessories like the SmallRig Monitor Mount 2903 and 2348.
Care: To maintain the handle's condition, clean it with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and ensure it is thoroughly dried afterward. Avoid using harsh chemicals or abrasive cleaners. Store in a dry place when not in use to prevent corrosion or damage to the silicone grip.