Floorsaver Epoxy Floor Paint - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Floorsaver Epoxy Floor Paint in Grey is an ideal solution for DIYers and professionals looking to protect concrete floors in garages, warehouses, or industrial spaces from heavy traffic and chemical exposure. It offers a robust, hard-wearing finish that prevents dust and resists hot tyre marking, though users should be aware that as a two-part system, it requires careful mixing and preparation before application.
All features
| Colour | Grey |
|---|---|
| Brand | Floorsaver |
Extended Product Information
FAQs
Can I apply this over existing paint?
Yes, provided the existing paint is well-bonded, clean, and has been sanded to provide a key for the new coating.
How long does it take to cure?
Refer to the product label for specific curing times as these can vary based on ambient temperature and humidity levels.
Is this suitable for outdoor use?
This product is primarily formulated for interior use in garages, warehouses, and industrial spaces.
Do I need a primer?
The product is designed to seal and protect, but always check the specific state of your concrete; very porous concrete may require a thin base coat first.
Can I use it on wood floors?
Yes, it is compatible with wood as well as concrete and cement screeds.
How do I clean the tools after application?
As a water-based formula, equipment can typically be cleaned with warm soapy water immediately after use.
Troubleshooting
Paint not sticking to the concrete surface
Ensure the floor was properly degreased and cleaned; the substrate may have been contaminated or damp during application.
Uneven finish or bubbling
Avoid over-working the paint with the roller and ensure the surface temperature is within the recommended range for application.
Soft or sticky finish after drying time
This is often caused by incorrect mixing ratios; ensure both parts are measured precisely before blending.
Pros and Cons
Pros
- Resists damage from heavy vehicle traffic and hot tyres
- Easy to clean surface once cured
- Prevents concrete dusting for a cleaner space
- Durable mid-gloss aesthetic finish
- Suitable for various substrates including wood and screed
Cons
- Requires proper mixing of the two-part system
- Surface preparation is critical for long-term adhesion
- Limited to specific temperature ranges for curing
Setup, Compatibility & Care
To ensure optimal adhesion, the floor must be clean, dry, and free from contaminants like oil or grease before application. For best results, use a degreaser and ensure the concrete is sound and well-bonded. The paint is a two-part formula, meaning you must measure and mix the components thoroughly according to the ratio provided in the instructions. Apply using a high-quality roller or brush, ensuring even coverage. Once applied, allow the coat to cure for the recommended time before allowing vehicle traffic. Regular cleaning can be performed with mild detergents and a mop, as the sealed finish does not absorb moisture or dirt.