RING ULTRACHARGE 10A Smart Car Charger & Battery Maintainer - Ring - ULTRACHARGE 10A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The RING ULTRACHARGE 10A is designed for car owners and professionals needing to charge and maintain 12V and 24V batteries efficiently. Its key benefit is the smart charging technology coupled with diagnostic tools for identifying and repairing battery issues. A minor caveat is that while versatile, it's optimized for common battery types and may require specific attention for less common chemistries.
All features
| Model Part Number | ULTRACHARGE 10A |
|---|---|
| Brand | Ring |
Extended Product Information
FAQs
What is the maximum charging current?
The RING ULTRACHARGE 10A delivers a maximum charging current of 10 Amps.
Can this charger be used with lithium batteries?
Yes, the charger is compatible with lithium batteries, along with Lead Acid, Gel, EFB, and AGM types.
How do I use the battery repair mode?
The battery repair mode is typically selected via the charger's display menu. Follow the on-screen prompts and ensure the battery is safely connected. This mode is designed to help desulfate batteries.
What does the alternator test do?
The alternator test checks the output voltage of your vehicle's alternator to ensure it is charging the battery correctly. This helps diagnose potential charging system faults.
Is the charger waterproof?
Yes, the RING ULTRACHARGE 10A features an IP65 waterproof housing, making it resistant to dust and water ingress.
Can I leave the charger connected to the battery long-term?
The charger is designed for smart charging and maintenance, which typically allows for long-term connection for battery maintenance. However, always refer to the specific battery manufacturer's recommendations and the charger's manual.
What is the integrated power supply mode for?
The integrated power supply mode provides a stable DC voltage output (e.g., 13.6V) for maintaining vehicle electronics during battery changes or for diagnostic purposes without the need for a connected battery.
Troubleshooting
Charger not powering on
Check that the charger is securely plugged into a functioning power outlet. Ensure the power cable is not damaged.
Battery not charging
Verify that the clamps are securely attached to the correct battery terminals. Ensure the selected battery type on the display matches the battery installed. Check for any error messages on the LCD screen.
Alternator test failure
Ensure the engine is running during the test. Check battery connections are secure. The vehicle's alternator may require professional inspection if the test repeatedly fails.
LCD screen is blank or unresponsive
Disconnect the charger from the power source and the battery, wait 30 seconds, then reconnect. If the issue persists, contact customer support.
Overheating during use
Ensure the charger is in a well-ventilated area and not covered. If overheating continues, disconnect the unit and allow it to cool down. Check for internal fan obstructions.
Pros and Cons
Pros
- Fast and efficient charging for a wide range of vehicle types.
- Broad compatibility with various battery chemistries, including Lithium.
- Advanced diagnostic features like alternator testing and battery repair mode.
- Stable power supply mode for vehicle maintenance without battery connection.
- Durable, waterproof construction suitable for workshop or outdoor use.
- User-friendly digital display for clear status monitoring.
Cons
- May require specific settings or advanced knowledge for certain Lithium battery types.
- The 10A charging current might be too low for very large industrial batteries.
- Advanced diagnostic features require a basic understanding of automotive systems.
- Does not support charging for batteries outside the 12V/24V range.
- The included storage case is basic and may not offer extensive protection for the charger itself.
Setup, Compatibility & Care
Setup:
- Ensure the charger is connected to a suitable AC power source.
- Connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (-) battery terminal or a suitable chassis ground point.
- Select the appropriate battery type and charging mode using the digital display.
- The charger will automatically begin the charging process or enter diagnostic mode if selected.
Compatibility:
- Voltage: 12V and 24V systems.
- Battery Types: Lead Acid, Gel, EFB, AGM, and Lithium.
- Vehicle Types: Cars, vans, SUVs, and larger vehicles with compatible battery systems.
Care:
- Keep the charger and its cables clean and free from dirt, oil, and debris.
- Wipe the unit with a dry or slightly damp cloth. Avoid harsh chemicals or solvents.
- Ensure the clamps are clean for optimal connection.
- Store the charger in its included case in a dry, protected environment when not in use.
- Periodically inspect the cables and clamps for any signs of damage.