Frenchic 400ml Clear Wax
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to seal and enhance wood surfaces or upcycled furniture with Frenchic 400ml Clear Wax. The key benefit is its ease of use and ability to provide a beautiful, buffed sheen. Keep in mind that this wax is for interior use only.
All features
| Brand | Frenchic |
|---|
Extended Product Information
FAQs
How much area will a 400ml tin cover?
A 400ml tin will provide a minimum coat of 10m², depending on the surface porosity and the desired effect.
Can I use this wax on outdoor furniture?
No, this wax is designed for interior use only.
Is this wax safe for use on children's toys?
Yes, it is EN71-3 certified, making it safe for use on children's toys.
How long does it take for the wax to dry?
Drying times can vary, so always refer to the specific instructions on the tin, but typically it takes a few hours.
Do I need to sand before applying the wax?
Sanding is not always required, but for a smoother finish, you may lightly sand the surface before waxing.
How do I remove the wax?
Use a suitable wax remover, following the manufacturer's instructions.
Can I use this wax on painted surfaces?
Yes, it is suitable for use as a top coat for the Original Artisan Range and other painted surfaces to enhance and protect them.
What kind of cloth should I use to apply the wax?
Use a lint-free cloth or a brush for application. For buffing, use a clean, dry cloth.
Troubleshooting
Wax appears streaky after application.
Apply a thinner coat of wax and ensure even distribution. Buff the surface thoroughly after drying.
The finish isn't as shiny as expected.
Ensure you've buffed the wax thoroughly with a clean cloth. You may need to apply an additional coat and buff again.
Wax is not adhering to the surface.
Make sure the surface is clean and dry. Lightly sand the surface for better adhesion if necessary.
Pros and Cons
Pros
- Easy to apply and work with.
- Provides a durable and protective finish.
- Enhances the natural beauty of wood.
- Safe for use around children.
- Virtually odorless during application.
- Great for upcycling projects.
Cons
- Only for interior use.
- Coverage can vary based on the surface porosity.
- Requires a buffing step to achieve the desired sheen.
- May require multiple coats for optimal protection.
- Not suitable for high-wear areas like floors.
Setup, Compatibility & Care
Setup
- Preparation: Ensure the surface is clean, dry, and free of any existing finishes or debris. For painted surfaces, make sure the paint is fully cured.
- Application: Apply a thin, even coat of wax using a lint-free cloth or brush. Avoid applying too much wax at once.
- Drying: Allow the wax to dry completely according to the manufacturer's instructions (usually a few hours).
- Buffing: Once dry, buff the surface with a clean, dry cloth to achieve the desired sheen.
Compatibility
- Suitable for: Wood surfaces and as a top coat for the Original Artisan Range.
- Not Suitable for: Exterior use or high-wear areas like floors (unless specified).
Care
- Cleaning: Wipe the surface with a damp cloth.
- Maintenance: Reapply the wax as needed to maintain protection and enhance the finish. The frequency depends on the wear and tear the surface experiences.