TIPTOE Desk and Table Leg - Brioche Yellow - 75cm

The Tiptoe 75cm legs are the perfect solution for those looking to create a custom dining table or...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for DIY enthusiasts and homeowners looking to create custom furniture. The TIPTOE 75cm legs in Brioche Yellow offer a quick, tool-free solution for building a stylish and durable dining table or desk. A key consideration is the minimum and maximum tray thickness they can accommodate.

All features

ColourYellow
Model Part NumberM116609401
BrandTIPTOE

Extended Product Information

FAQs

Can I use these legs with any type of tabletop?

Yes, as long as the tabletop thickness is between 30mm and 41mm. You can use wood, laminate, glass (with appropriate pads), or stone.

How many legs do I need for a standard table?

For tabletops up to 180cm x 100cm, four legs are typically sufficient. For longer tabletops (over 180cm), it is recommended to add two legs per meter for increased stability.

Do I need any tools to install these legs?

No, the TIPTOE legs are designed with a tool-free clamping system, making installation quick and easy without any tools.

What is the maximum weight capacity per set of legs?

A set of four TIPTOE legs can support a maximum weight of 70 kg, including the tabletop itself.

Are these legs suitable for outdoor use?

While made of durable steel, they are primarily designed for indoor furniture. Prolonged exposure to moisture and outdoor elements may affect the finish.

How do I clean the Brioche Yellow finish?

Clean the legs with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the paintwork.

Can I buy these legs in different colors?

Yes, the TIPTOE legs are available in a range of trendy colors, allowing you to mix and match for a unique look.

Troubleshooting

Legs feel wobbly after installation

Ensure the clamping screw is tightened securely against the tabletop. Verify the tabletop thickness is within the 30mm to 41mm range. For tabletops longer than 180cm, ensure additional legs have been added as per guidelines.

Difficulty tightening the clamp

Check that the tabletop thickness is within the acceptable range. Ensure there are no obstructions preventing the clamp from engaging properly with the tabletop edge.

Yellow color is not as expected

Colors may vary slightly on different screens. Refer to product images and available swatches for the most accurate representation. TIPTOE legs are sold individually, allowing you to mix and match colors.

Scratch on the leg finish

Minor scratches can be carefully touched up with model paint. For significant damage, replacement parts may be necessary. Contact customer support if the issue is severe.

Pros and Cons

Pros

  • Extremely easy and fast to assemble, no tools required.
  • Durable construction with high-quality steel.
  • Sustainable and environmentally conscious manufacturing.
  • Allows for a high degree of personalization in furniture design.
  • Provides a modern, industrial aesthetic.

Cons

  • Requires a tabletop of a specific thickness range (30mm - 41mm).
  • Sold individually, requiring multiple purchases for a complete set.
  • Maximum weight capacity needs to be considered for heavier tops.
  • Extended tabletops may require additional legs, increasing cost and complexity.

Setup, Compatibility & Care

Setup:

  1. Select a tabletop with a thickness between 30mm and 41mm.
  2. Position the TIPTOE leg on the underside of the tabletop where desired.
  3. Tighten the integrated clamping screw system using the provided handle until the leg is firmly secured to the tabletop. Repeat for all legs.

Compatibility:

  • Tabletop Dimensions: Maximum size for 4 legs is 180cm x 100cm. For lengths exceeding 180cm, add two legs per meter.
  • Tabletop Thickness: Compatible with surfaces ranging from 30mm to 41mm.
  • Weight Capacity: Maximum of 70 kg for a set of 4 legs (including the weight of the tabletop).

Care:

  • Wipe clean with a damp cloth.
  • Avoid abrasive cleaners or solvents to preserve the finish.
  • Periodically check the clamping screws to ensure they remain tight.