Evercoat Easy Sand Polyester Putty - 880ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Evercoat Easy Sand Polyester Putty is a high-performance finishing glaze designed for automotive body professionals and serious DIYers looking to achieve a flawless, mirror-like surface before painting. It excels at filling pinholes, scratches, and minor surface imperfections, significantly reducing sanding time thanks to its superior flowable formula. While it offers a professional-grade finish, users must be comfortable with mixing two-part systems, as the BPO hardener must be precisely measured to ensure a proper cure.
All features
| Model Part Number | 101669 |
|---|---|
| Brand | Evercoat |
Extended Product Information
FAQs
Can this be used over bare metal?
Yes, but it is best applied over properly sanded and cleaned metal to ensure maximum mechanical adhesion.
How long do I have to sand it after application?
Depending on temperature and humidity, it is usually sandable within 15-20 minutes.
Does it shrink over time?
When mixed correctly, Evercoat Easy Sand has minimal shrinkage compared to lower-quality fillers.
Can I use it to fill deep dents?
No. This product is a finishing putty designed for thin coats. For deep dents, use a dedicated body filler first.
Is the BPO hardener included?
Yes, every 880ml container comes with the required BPO hardener.
What happens if I use too much hardener?
Using too much hardener will cause the mixture to kick off too fast, making it difficult to apply and potentially causing bleeding into the paint finish later.
Troubleshooting
Putty remains tacky or soft after extended time
Usually caused by under-mixing or improper hardener ratio. Ensure the hardener is fully incorporated until the color is consistent.
Hardener dried out in the tube
BPO hardener has a finite shelf life. Replace the tube if the consistency has changed or it no longer triggers a cure.
Pinholes appearing after sanding
Often caused by applying the product too aggressively or over-working the mix. Apply lighter pressure and allow the product to flow naturally.
Pros and Cons
Pros
- Extremely easy to sand, saving substantial labor time
- Excellent at filling minor surface imperfections and pinholes
- Flowable consistency makes application smooth and uniform
- Provides a high-quality foundation for paint systems
Cons
- Requires precise mixing ratios with BPO hardener
- Short working time due to fast-curing properties
- Not intended for deep dent filling or structural repairs
Setup, Compatibility & Care
To prepare the product, clean your target surface thoroughly with a wax and grease remover to ensure proper adhesion. On a clean mixing board, dispense the required amount of putty and add the BPO hardener according to the manufacturer's ratio—typically a small ribbon of hardener across the putty. Mix thoroughly until the color is uniform.
- Application: Use a plastic spreader to apply in thin, firm strokes.
- Compatibility: Compatible with most automotive primers and topcoats. Always test on a scrap piece if using specialized custom paints.
- Care: Keep the container tightly sealed in a cool, dry area to prevent the base from drying out. Avoid introducing dust or debris into the original container.