Indasa 2K Plastic Repair Adhesive - 50ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Indasa 2K Plastic Repair Adhesive is a professional-grade, two-part polyurethane bonding solution specifically engineered for automotive body shop technicians and DIY enthusiasts repairing vehicle plastics. Its primary benefit is providing a high-strength, durable bond on critical components like bumpers, tabs, and emblems, though users must be prepared to manage the rapid curing time inherent in two-part chemical adhesives.
All features
| Model Part Number | 472767/KIT |
|---|---|
| Brand | Indasa |
Extended Product Information
FAQs
Can this adhesive be used on all types of plastic?
It is designed for common automotive plastics; however, it is not recommended for low-surface-energy plastics like polyethylene or polypropylene without proper adhesion promoters.
How long does the adhesive take to cure?
The adhesive features a fast-curing formula, typically setting within a few minutes, though full structural strength is reached within a few hours.
Can I sand the adhesive once it is dry?
Yes, the product is designed to be sanded and feathered into the surrounding plastic to create a smooth surface for painting.
What should I do if I run out of nozzles?
It is recommended to use only the included Indasa mixer nozzles to maintain the correct ratio. Always keep the used nozzle on the cartridge to prevent internal clogging.
Is this safe for interior door panels?
Yes, it provides a strong bond for interior plastic components, but ensure the area is well-ventilated during application.
Troubleshooting
Adhesive is not coming out of the nozzle
Check if the material inside the nozzle has already cured; if so, replace the mixer nozzle with a fresh one.
The bond feels weak or flexible after curing
Verify that you discarded a small amount of initial product during setup to ensure equal parts of the two-part formula were mixed correctly.
Cartridge is hard to push through the gun
Ensure the cartridge is seated correctly in the gun and that the plastic nozzle is not blocked by dried residue.
Pros and Cons
Pros
- High-strength structural bond for automotive plastics
- Includes 10 mixer nozzles for consistent precision
- Professional-grade polyurethane chemistry
- Efficient size for small to medium repair jobs
Cons
- Fast cure time requires quick, confident application
- Requires a compatible applicator gun
- Strict storage conditions needed to maintain shelf life
Setup, Compatibility & Care
To begin using the adhesive, ensure you have a standard 50ml dual-cartridge dispensing gun. Insert the cartridge into the gun and bleed a small amount of material to ensure both parts are flowing evenly. Attach one of the included mixer nozzles securely by twisting it onto the cartridge head. Always perform a test bead on a scrap piece of plastic to confirm proper mixing. After use, leave the used nozzle on the cartridge to act as a cap; this prevents air from entering and hardening the remaining product in the tubes. For optimal results, store the adhesive in a cool, dry place away from direct sunlight, and always clean the plastic surface with a dedicated degreaser before application to ensure maximum adhesion.